Vail-40D 10’ x 8’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench(3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key(2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Backdrop, Photo-ops, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation

Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 10’ edge and one 8′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Split Connectors
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 120″W x 96″H x 1.57″D
Artwork Size: 122″W x 98″H
Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H