Double-Sided Graphic Replacement for the Vail-120D 3’ x 4’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.


Graphic Only Includes:

• (2) Custom Single-Sided Graphics with SEG hem

Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side. 


Warranty: One (1) year on graphics 


Artwork Size: 38″W x 50″H 


Shipping Dimensions: (1) box 16″L x 10″W x 6″H


Shipping Weight: 6 lbs

Double-Sided Graphic Replacement for the Vail-120D 3’ x 5’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Graphic Only Includes: (2) Custom Single-Sided Graphics with SEG hemMaterial: Deco Fabric (non-stretch) Print Process: Full Color Dye Sublimation Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side. Warranty: One (1) year on graphics Artwork Size:38″W x 62″H Shipping Dimensions: (1) box 16″L x 10″W x 6″H Shipping Weight: 6 lbs

Double-Sided Graphic Replacement for the Vail-120D 3’ x 6’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.


Graphic Only Includes:

• (2) Custom Single-Sided Graphics with SEG hem

Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side. 


Warranty: One (1) year on graphics 


Artwork Size: 38″W x 74″H 


Shipping Dimensions: (1) box 16″L x 10″W x 6″H


Shipping Weight: 6 lbs

Double-Sided Graphic Replacement for the Vail-120D 3’ x 7’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.


Graphic Only Includes:

• (2) Custom Single-Sided Graphics with SEG hem

Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side. 


Warranty: One (1) year on graphics 


Artwork Size: 38″W x 86″H 


Shipping Dimensions: (1) box 20″L x 12″W x 6″H


Shipping Weight: 6 lbs

Vail-120D 3’ x 9’ Frame Only. The VAIL-120D is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit). 


Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
• (2) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Hardware Setup: To make one edge of the frame, take two cut VAIL-120D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 3′ edge and slide in Corner Connector; tighten. Repeat this three times. 


Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector. 


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 


Warranty: Lifetime on frame 


Frame Size: 36″W x 108″H x 4.72″D 


Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H & 49.75″L x 7.25″W x 6.5″H

Vail-120D 5’ x 9’ Frame Only. The VAIL-120D is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit). 


Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
• (2) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Hardware Setup: To make one edge of the frame, take two cut VAIL-120D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 5′ edge and slide in Corner Connector; tighten. Repeat this three times. 


Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector. 


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 


Warranty: Lifetime on frame 


Frame Size: 60″W x 108″H x 4.72″D 


Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H

Vail-120D 6’ x 9’ Frame Only. The VAIL-120D is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit). 


Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
• (2) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Hardware Setup: To make one edge of the frame, take two cut VAIL-120D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 6′ edge and slide in Corner Connector; tighten. Repeat this three times. 


Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector. 


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 


Warranty: Lifetime on frame 


Frame Size: 72″W x 108″H x 4.72″D 


Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H

Vail-120D 7’ x 9’ Frame Only. The VAIL-120D is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit). 


Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
• (2) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Hardware Setup: To make one edge of the frame, take two cut VAIL-120D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 7’ edge and slide in Corner Connector; tighten. Repeat this three times. 


Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector. 


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 


Warranty: Lifetime on frame 


Frame Size: 84″W x 108″H x 4.72″D 


Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H

Single-Sided Graphic Replacement for the Vail-60S 2’ x 7’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:

• (1) Custom Single-Sided Graphic with SEG hem

Material: Deco Fabric (non-stretch)

Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 26″W x 74″H

Shipping Dimensions: 16″L x 10″W x 6″H

Shipping Weight: 3 lbs