This Pocket Trim Fabric is black and is the perfect fit for a Small Feather Banner Flag.

Add extra oomph to any size Casita Canopy by attaching a flag! To attach a flag*, first add this Casita Canopy Flag Connector. Place this Flag Connector at the desired height onto the leg of the frame. Then, simply twist included knobbed screws to tighten. Add the flag and voila!

Please note:
1. *Use with Small Feather Banner Flag ONLY.
2. Open Casita fully and add canopy top, back wall and half-side walls before attaching Flag Connector.
3. This add-on has a toolless assembly
4. Pole Length: 7.75"
5. Hole Diameter: 1"

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches.

Includes:

• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on graphics

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches.

Includes:

• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on graphics

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches.

Includes:

• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on graphics

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.

Includes:

• Pole
• Steel round base (25"L x 25"W x 2"H)
• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on hardware and graphics

Display Size (with graphic): 2.6'W x 7'H

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches.

Includes:

• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on graphics

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.

Includes:

• Pole
• Steel round base (25"L x 25"W x 2"H)
• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on hardware and graphics

Display Size (with graphic): 2.6'W x 6'H

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.

Includes:

• Pole
• Steel round base (25"L x 25"W x 2"H)
• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on hardware and graphics

Display Size (with graphic): 2.6'W x 8'H

Banner Size: Varies; please see drop down selection

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches. The 25-pound weighted steel base provides stability.

Includes:

• Pole
• Steel round base (25"L x 25"W x 2"H)
• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on hardware and graphics

Display Size (with graphic): 2.6'W x 5'H

Banner Size: Varies; please see drop down selection

​

This 23ft Mondo Flagpole banner stand comes with a single-sided custom print, stand and water base. A fresh, new design of the giant pole, the Mondo flagpole is ideal for outdoor events, conference, sport events, etc. The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh fabric material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. The telescopic aluminum flagpole fits into a plastic base that can be filled with water for stability. The flag is held with rings. Mondo flagpoles are easy to handle and install.

Includes:

• Printed Banner (Single-Sided)
• Water Base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 aluminum support legs with plastic clips
• 10 large plastic clips for sides
• 5 small plastic clips for top
• Base Bag (32" x 16")
• Pole Bag (66" x 5")

Warranty: One (1) years on hardware and graphics.

Weight: Whole Stand is 40 lbs = Pole is 16 lbs + Base is 24 lbs

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

This Single-Sided printed banner is the replacement graphic for the 23ft Mondo Banner Stand.

Includes:

• Printed banner (single-sided)

Material: Mesh Fabric

Warranty: One (1) year on graphics

Banner Size: 58"W x 218"H (5 lbs)

​

This 23ft Mondo Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice come with a Double-Sided custom graphic. For the double-sided 23ft Mondo graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 2 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Includes:

• Printed Banner (Double-Sided)
• Water Base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 aluminum support legs with plastic clips
• 10 large plastic clips for sides
• 5 small plastic clips for top
• Base Bag (32" x 16")
• Pole Bag (66" x 5")

Warranty: One (1) year on hardware and graphics

Weight: Whole Stand is 46 lbs = Pole is 22 lbs + Base is 24 lbs

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

​

This 13ft Mondo Flagpole banner stand comes with a single-sided custom print, stand and water base. A fresh, new design of the giant pole, the Mondo flagpole is ideal for outdoor events, conference, sport events, etc. The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh fabric material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. The telescopic aluminum flagpole fits into a plastic base that can be filled with water for stability. The flag is held with rings. Mondo flagpoles are easy to handle and install.

Includes:

• Printed Banner (Single-Sided)
• Water Base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 Aluminum support legs with plastic clips
• 9 plastic ring clips
• Base Bag (32" x 16")
• Pole Bag (66" x 5")

Warranty: One (1) year on hardware and graphics.

Display Size: 2.92'W x 13'H

Diameter of Base: 25"

Weight:
28 lbs (Pole 11 lbs + Base 15 lbs)

Shipping Dimensions:
26"L x 26.25"W x 10.5"H
*Shipping in 2 cases

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

This Double-Sided printed banner is a replacement graphic for the 23ft Mondo Banner Stand.

Includes:

• Printed Banner (double-sided)

Banner Material: Mesh Fabric

Warranty: One (1) year on graphics

Banner Size: 58"W x 218"H (10 lbs)

This Double-Sided printed banner is the replacement graphic for the 17ft Mondo Banner Stand.

Includes:

• Printed Banner (Double-Sided)

Material: Mesh Fabric

Warranty: One (1) on graphics

Banner Size: 47"W x 162"H (8 lbs)

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

This Single-Sided printed banner is the replacement graphic for the 17ft Mondo Banner Stand.

Includes:

• Printed Banner(Single-Sided)

Material: Mesh Fabric

Warranty: One (1) year on graphics

Banner Size: 47"W x 162"H (4 lbs)

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

This Single-Sided printed banner is a replacement graphic for the 13ft Mondo Banner Stand.

Includes:
Printed Banner (Single-Sided)

Material: Mesh Fabric

Warranty: One (1) year on graphics

Banner Size: 30"W x 118"H

This 17ft Mondo Flagpole banner stand comes with a single-sided custom print, stand and water base. A fresh, new design of the giant pole, the Mondo flagpole is ideal for outdoor events, conference, sport events, etc. The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh fabric material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. The telescopic aluminum flagpole fits into a plastic base that can be filled with water for stability. The flag is held with rings. Mondo flagpoles are easy to handle and install.

Includes:

• Printed banner (Single-Sided)
• Water Base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 aluminum support legs with plastic clips
• 10 large plastic clips for sides
• 5 small plastic clips for top
• Base Bag (32" x 16")
• Pole Bag (66" x 5")

Warranty: One (1) year on hardware and graphics.

Weight: Whole Stand is 46 lbs = Pole is 22 lbs + Base is 24 lbs

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

This Double-Sided printed banner is a replacement graphic for the 13ft Mondo Banner Stand.

Includes:
Printed Banner (Double-Sided)

Material: Mesh Fabric

Warranty: One (1) year on graphics

Banner Size: 30"W x 118"H

​

This 17ft Mondo Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice come with a Double-Sided custom graphic. For the double-sided 17ft Mondo graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 2 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Includes:

• Printed Banner (Double-Sided)
• Water Base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 Aluminum support legs with plastic clips
• 10 large plastic clips for sides
• 5 small plastic clips for top
• Base Bag (32" x 16")
• Pole Bag (66" x 5")

Warranty: One (1) year on hardware and graphics

Weight: Whole Stand is 40 lbs = Pole is 16 lbs + Base is 24 lbs

For quantity pricing on this product, please click the slim blue rectangular button titled "View Quantity Discounts" to your right.

This is the hardware for the 13ft Mondo Banner Stand.

Display Size: 2.92' x 13'
Diameter of Base: 25"

Includes:
Water Base which can hold up to 13 gallons of water
Pole with plastic end caps
4 Aluminum support legs with plastic clips
9 plastic ring clips
Base Bag (32" x 16")
Pole Bag (66" x 5")

Warranty: One (1) year on hardware and graphics

Weight:
28 lbs (Pole 11 lbs + Base 15 lbs)

Shipping Dimensions:
26"L x 26.25"W x 10.5"H
*Ships in 2 cases

This is the hardware for the 17ft. Mondo Banner Stand.

Includes:

• Water base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 aluminum support legs with plastic clips
• 10 large plastic ring clips for sides
• 5 small plastic ring clips for top
• Base bag (32" x 16")
• Pole bag (66" x 5")

Warranty: One (1) year on hardware

Weight:
Stand: 40 lbs (Pole, 16 lbs + Base, 24 lbs)

This Large Mamba banner stand outdoor flag comes with a single-sided custom print, stand and x-base. Use this 16.8 ft. tall flag on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Includes:

• Aluminum Pole
• X-base
• Printed Banner (Single-Sided; Note: This display DOES NOT have a double-sided option.)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55"
Height: 16.8 ft.

Graphic Banner (Finished Size):
30.5"W x 176"H

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 12"L x 3"W x 45"H

This Single-Sided printed graphic is a replacement graphic for the Large Mamba Banner Stand. (Note: This display DOES NOT have a double-sided option.)

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

Graphic Banner (Finished Size): 31.5"W x 176"H

Graphic Turnaround Time: 2 Business Days

This is the hardware for the Large Mamba Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.

Total Size:
Width (including base): 55"
Height: 16.8 ft.

Includes:

• Aluminum Pole
• X-base
• Black travel bag (36 1/2" x 10" x 4 1/2")

Shipping Dimensions: 10"L x 4"W x 42"H

Warranty: One (1) year on hardware

This Single-Sided printed graphic is a replacement graphic for the Small Mamba Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

Graphic Banner (Finished Size): 30.5"W x 97"H

Graphic Turnaround Time: 2 Business Days

This is the hardware for the Large Mamba Banner Stand with Spike base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Aluminum Pole
• Spike base
• Black travel bag (36 1/2" x 10" x 4 1/2")

Total Size:
Width (including base) : 55"
Height: 16.8 ft.

Shipping Dimensions: 12"L x 3"W x 45"H

Warranty: One (1) year on hardware

This is the hardware for the Medium Mamba Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.

Includes:

• Aluminum Pole
• X-base
• Black travel bag (36 1/2"W x 10"L x 4 1/2"D)

Total Size:
Width (including base): 55"
Height: 13.5 ft.

Shipping Dimensions: 10"L x 3"W x 45"H

Warranty: One (1) year on hardware

This Small Mamba Banner Stand outdoor flag comes with a single-sided custom print, stand and X-base. Use this 10.125 ft. tall flag on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Includes:

• Aluminum Pole
• X-base
• Printed Banner (Single-Sided)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55""
Height: 10.125 ft.

Graphic Banner (Finished Size): 30.5"w x 97"h

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 10"L x 4"W x 42"H

This is the hardware for the Medium Mamba Banner Stand with Spike base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Aluminum Pole
• Spike base
• Black travel bag (36 1/2"W x 10"L x 4 1/2"D)

Total Size:
Width (including base): 55"
Height: 13.5 ft.

Shipping Dimensions: 10"L x 3"W x 45"H

Warranty: One (1) year on hardware

This Large Mamba banner stand outdoor flag comes with a single-sided custom print, stand and spike base. Use this 16.8 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package Includes:

• Aluminum Pole
• Spike base
• Printed Banner (Single-Sided; Note: This display DOES NOT have a double-sided option.)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55"
Height: 16.8 ft.

Graphic Banner (Finished Size): 30.5"W x 176"H

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 12"L x 3"W x 45"H

This Small Mamba Banner Stand outdoor flag comes with a single-sided custom print, stand and X-base. Use this 10.125 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Includes:

• Aluminum Pole
• Spike base
• Printed Banner (Single-Sided)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55"
Height: 10.125 ft.

Graphic Banner (Finished Size): 30.5"w x 97"h

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 10"L x 3"W x 41"H

This Double-Sided printed graphic is a replacement graphic for the Small Mamba Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

Graphic Banner (Finished Size): 31.5"W x 97"H

Graphic Turnaround Time: 2 Business Days

This Medium Mamba banner stand outdoor flag comes with a single-sided custom print, stand and x-base base. Use this 13.5 ft. tall flag on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Includes:

• Aluminum Pole
• X-base
• Printed Banner (Single-Sided; Note: This display DOES NOT have a double-sided option.)
• Black travel bag (36 1/2" W x 10"L x 4 1/2"D)

Warranty: One (1) year on hardware and graphics

Graphic Turnaround Time: 2 Business Days

Total Display Size:
Width (including base): 55"
Height: 13.5 ft.

Graphic Banner (Finished Size): 30.5"w x 136"h

Shipping Dimensions: 10"L x 3"W x 45"D

This Single-Sided printed graphic is a replacement graphic for the Medium Mamba Banner Stand. (Note: This display DOES NOT have a double-sided option.)

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

Graphic Banner (Finished Size): 31.5"W x 136"H

Graphic Turnaround Time: 2 Business Days

This is the hardware for the Small Mamba Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Total Size:
Width (including base): 55"
Height: 10.125 ft.

Includes:

• Aluminum Pole
• Spike base
• Black travel bag (36 1/2" x 10" x 4 1/2")

Shipping Dimensions: 10"L x 3"W x 41"H
Warranty: One (1) year on hardware

This Small Mamba Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Includes:

• Aluminum Pole
• X-Base
• Printed banner (double-sided)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (includes base width) : 55"
Height: 121.5"

Graphic Banner (Finished Size): 30.5"w x 97"h

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 10"L x 4"W x 42"H

This Medium Mamba banner stand outdoor flag comes with a single-sided custom print, stand and spike base. With the default spike base, use this 13.5 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Includes:

• Aluminum Pole
• Spike base
• Printed Banner (Single-Sided; Note: This display DOES NOT have a double-sided option.)
• Black travel bag (36 1/2" W x 10"L x 4 1/2"D)

Warranty: One (1) year on hardware and graphics

Graphic Turnaround Time: 2 Business Days

Total Display Size:
Width (including base): 55"
Height: 13.5 ft.

Graphic Banner (Finished Size): 30.5" x 136"

Shipping Dimensions: 10"L x 3"W x 45"D (with Spike base)

This Small Mamba Banner Stand outdoor flag comes with a single-sided custom print, stand and spike base. Use this 10.125 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Includes:

• Aluminum Pole
• Spike base
• Printed Banner (Double-Sided)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55"
Height: 10.125 ft.

Graphic Banner (Finished Size):  30.5"w x 97"h

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 10"L x 3"W x 41"H

This Store Front printed graphic is the replacement graphic for the Store Front Flag Banner Stand. Choose from Single-Sided or Double-Sided by clicking the drop down menu, then click "Update Price" to see total charge.

Includes: Printed Graphic Flag (Single-Sided or Double-Sided)

Material: Mesh Fabric (Dye Sublimated Process)

Warranty: One (1) year on graphics

This Store Front flag is designed for storefront display, but can be placed indoors as desired. Its heavy steel square base provides support while on display. The pole is made of up materials such as aluminum, plastic and fiberglass. The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation (single-sided or double-sided options). Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base. (See additional pictures to see close up.)

Graphic Package includes:

• Pole
• Square base (13.75"L x 13.75"W; NOTE: The pole will only fit to square base.)
• 1 Single-Sided Custom graphic
• Travel bag with handle

Total Height: 8.6 ft.
Weight: 19 lbs
Shipping Dimensions: 14.75"L x 39"W x 2.75"D

Warranty: One (1) year on graphics and hardware

This Store Front flag is designed for storefront display, but can be placed indoors as desired. Its heavy steel square base provides support while on display. The pole is made of up materials such as aluminum, plastic and fiberglass. The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation (single-sided or double-sided options). Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base. (See additional pictures to see close up.)

Graphic Package includes:

• Pole
• Square base (13.75"L x 13.75"W; NOTE: The pole will only fit to square base.)
• 1 Double-Sided Custom graphic
• Travel bag with handle

Total Height: 8.6 ft.

Weight: 19 lbs

Shipping Dimensions: 14.75"L x 39"W x 2.75"D

Warranty: One (1) year on graphics and hardware

This Store Front printed graphic is the replacement graphic for the Store Front Flag Banner Stand. Choose from Single-Sided or Double-Sided by clicking the drop down menu, then click "Update Price" to see total charge.

Includes: Printed Graphic Flag (Single-Sided or Double-Sided)

Material: Mesh Fabric (Dye Sublimated Process)

Warranty: One (1) year on graphics

This Store Front flag is designed for storefront display, but can be placed indoors as desired. Its heavy steel square base provides support while on display. The pole is made of up materials such as aluminum, plastic and fiberglass. The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation (single-sided or double-sided options). Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base. (See additional pictures to see close up.)

Package includes:

• Pole
• Square base (13.75"L x 13.75"W; NOTE: The pole will only fit to square base.)
• Travel bag with handle

Total Height: 8.6 ft.
Weight: 19 lbs
Shipping Dimensions: 14.75"L x 39"W x 2.75"D

Warranty: One (1) year on hardware

This Single-Sided printed banner is a replacement graphic for the Extra-Large Teardrop Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

This Double-Sided printed banner is a replacement graphic for the Extra-Large Teardrop Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

This Extra-Large Teardrop banner stand outdoor flag comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• Spike base
• Printed banner (single-sided)
• Nylon bag

Height:  15.75 ft.

Warranty: One (1) year on hardware and graphics

Includes:

• Pole
• X-base
• Nylon bag

Height: 14.5 ft.

Warranty: One (1) year on hardware

This Extra-Large Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X-base
• Printed banner (double-sided)
• Nylon bag

Height:  15.75 ft.
Warranty: One (1) year on hardware and graphics

This is the hardware for the Extra-Large Teardrop Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Pole
• Spike base
• Nylon bag

Height: 15.75 ft.

Warranty: One (1) year on hardware

This Large Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X base
• Printed banner (double-sided)
• Nylon bag

Height:  14.5 ft.
Warranty: One (1) year on hardware and graphics

This Single-Sided printed banner is the replacement graphic for the Medium Teardrop Banner Stand.

Material: Mesh Fabric

Warranty: One (1) year on graphics

This Single-Sided printed banner is a replacement graphic for the Small Teardrop Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

This Double-Sided printed banner is a replacement graphic for the Medium Teardrop Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

This Double-Sided printed banner is a replacement graphic for the Small Teardrop Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

This is the hardware for the Small Teardrop Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.

Includes:

• Pole
• X-base
• Nylon bag

Height: 8.2 ft.

Warranty: One (1) year on hardware

This Small Teardrop banner stand outdoor flag comes with a single-sided custom print, stand and spike base. With the default spike base, use this 8.2 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• X base
• Printed banner (single-sided)
• Nylon bag

Height:  8.2 ft.
Warranty: One (1) year on hardware and graphics

This is the hardware for the Large Teardrop Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:

• Pole
• Spike base
• Nylon bag

Height: 14.5 ft.

Warranty: One (1) year on hardware

This Medium Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X base
• Printed banner (double-sided)
• Nylon bag

Height:  11 ft.
Warranty: One (1) year on hardware and graphics

This Small Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X base
• Printed banner (double-sided)
• Nylon bag

Height:  8.2 ft.

Warranty: One (1) year on hardware and graphics

This is the hardware for the Small Teardrop Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Pole
• Spike base
• Nylon bag

Height: 8.2 ft.

Warranty: One (1) year on hardware

This Medium Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• Spike base
• Printed banner (double-sided)
• Nylon bag

Height:  11 ft.

Warranty: One (1) year on hardware and graphics

This is the hardware for the Medium Teardrop Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.

Package includes:

• Pole
• X base
• Nylon bag
• Height: 11 ft.

Warranty: One (1) year on hardware and graphics

This is the hardware for the Medium Teardrop Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Package includes:

• Pole
• Spike base
• Nylon bag
• Height: 11 ft.

Warranty: One (1) year on hardware

This Extra-Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 19.7ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• X Base
• Printed Banner (Single-Sided)
• Nylon Bag

Height:  19.7 ft.

Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year on hardware and graphics

​

This Double-Sided printed banner is a replacement graphic for the Extra-Large Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This Single-Sided printed banner is a replacement graphic for the Extra-Large Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This is the hardware for the Extra-Large Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height 19.7 ft.
Includes:

• Pole
• X-base
• Nylon bag

Height: 19.7 ft.

Warranty: One (1) year on hardware

​

This Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 16.4ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• X Base
• Printed Banner (Single-Sided)
• Nylon Bag

Height:  16.4 ft.

Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year on hardware and graphics

​

This Extra Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 19.7ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• Spike Base
• Printed Banner (Double-Sided)
• Nylon Bag

Height:  19.7 ft.

Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year on hardware and graphics

​

This Extra-Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 19.7ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• Spike Base
• Printed Banner (Single-Sided)
• Nylon Bag

Height:  19.7 ft.

Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year on hardware and graphics

​

This Single-Sided printed banner is a replacement graphic for the Large Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This Double-Sided printed banner is a replacement graphic for the Large Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This is the hardware for the Extra-Large Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Pole
• Spike base
• Nylon bag

Heights: 19.7 ft.

Warranty: One (1) year on hardware

​

This 16.4ft Large Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X Base
• Printed Banner (Double-Sided)
• Nylon Bag

Height:  16.4 ft.

Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year warranty on hardware and graphics

​

This is the hardware for the Large Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 16.4 ft.
Includes:

• Pole
• X-base
• Nylon bag

Height: 16.4 ft.

Warranty: One (1) year on hardware

​

This Medium Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• X Base
• Printed Banner (Single-Sided)
• Nylon Bag

Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year on hardware and graphics

​

This 15.75 ft. Medium Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X Base
• Printed Banner (Double-Sided)
• Nylon Bag

Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year warranty on hardware and graphics

Option Base: Water Base hold up to about 2.5 gallons of water.

​

This Single-Sided printed banner is a replacement graphic for the Small Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This is the hardware for the Large Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:

• Pole
• Spike base
• Nylon bag

Height: 16.4 ft.

Warranty: One (1) year on hardware

​

This Small Feather Flag graphic package comes with single-sided custom print, stand and spike base. With the default spike base, use this 9.84ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• X Base
• Printed Banner (Single-Sided)
• Nylon Bag

Height: 9.84 ft.
Base Pole Diameter: 0.875" (7/8")
Warranty: One (1) year on hardware and graphics

​

This is the hardware for the Medium Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 15.75 ft.
Includes:

• Pole
• X-base
• Nylon bag

Height: 15.75 ft.

Warranty: One (1) year on hardware

​

This is the hardware for the Small Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 9.84 ft.
Includes:

• Pole
• X-base
• Nylon bag

Height: 9.84 ft.

Warranty: One (1) year on hardware