Vail-40D 9’ x 6’ Frame Only. The VAIL-40D is a double-sided extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Frame Includes:
(1) 4-sided frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench ((2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 6′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 108″W x 72″H x 1.57″D
Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H

Double-Sided Graphic Replacement for the Vail-40D 9’ x 6’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 110″W x 74″H
Shipping Dimensions: 20″L x 16″W x 6″H
Shipping Weight: 8 lbs

Vail-40D 10’ x 8’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench(3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key(2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Backdrop, Photo-ops, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation

Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 10’ edge and one 8′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Split Connectors
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 120″W x 96″H x 1.57″D
Artwork Size: 122″W x 98″H
Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H

Vail-40D 5’ x 4’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 60″W x 48″H x 1.57″D
Artwork Size: 62″W x 50″H
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

Double-Sided Graphic Replacement for the Vail-40D 5’ x 5’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 62″W x 62″H
Shipping Dimensions: 16″L x 10″W x 6″H
Shipping Weight: 6 lbs

Vail-40D 3’ x 8’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 36″W x 96″H x 1.57″D
Artwork Size: 38″W x 98″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

Vail-40D 7’ x 4’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)
Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem)(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 84″W x 48″H x 1.57″D
Artwork Size: 86″W x 50″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

Single-Sided Graphic Replacement for the Vail-40D 3’ x 7’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 38″W x 86″H
Shipping Dimensions: (1) box 16″L x 10″W x 6″H
Shipping Weight: 3 lbs

Vail-40D 2’ x 3’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL L-Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 24″W x 36″H x 1.57″D
Artwork Size: 26″W x 38″H
Shipping Dimensions: (1) box 49.75″L x 7.25″W x 6.5″H

Sleek and “EZ”, our tension fabric systems are a great alternative to standard backwall displays. Quickly assembled in just 5 minutes, slide the tubes together to make the frame and lock in place with a push button snap.  Then, simply pull the pillowcase-like graphic over the frame and zip it shut. The zipper, hidden from view, tightens the stretch fabric beautifully displaying your image.  Disassembled, this lightweight frame and graphic fits inside its included bag.

Graphic Package Includes:

• (1) 10 ft. Aluminum Frame
• 1) EZ Tube Travel Bag with wheels
• (1) Double-Sided Graphic Print

Features
Display Size: 120″W x 89″H x 22″D
Template Size: Front side: 122″W x 88.25″H; Back side: 123.5″W x 87.25″H
Shipping Size: 53”L x 13”W x 8”H
Material: Stretch Fabric, Dye-Sublimation
Weight: 32 lbs
Warranty: Lifetime on Hardware. One (1) year on Graphic.