Single-Sided Graphic Replacement for the Vail-60S 4’ x 9’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:

• (1) Custom Single-Sided Graphic with SEG hem

Material: Deco Fabric (non-stretch)

Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size:50″W x 110″H

Shipping Dimensions: 16″L x 12″W x 6″H

Shipping Weight: 4 lbs

Vail-60S 4′ x 9′ Frame Only. The VAIL-60S is a single-sided extrusion with a profile width of 60mm and has a solid outside finish. Because the back side of the VAIL-60S is short, it works especially well for wall mounting letting you affix the frame in multiple ways; however, the VAIL-60S is suitable for free-standing or hanging overhead as well. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).

Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: Take two VAIL-60S extrusions and slide ein Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 48″W x 108″H x 2.36″D

Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

VAIL-60S 5′ x 10’ Single-Sided Graphic Package. With a solid outside finish unlike the ASPEN-40D, the VAIL-60S is a single-sided extrusion with a profile width of 60mm. The VAIL-60S is rigid because its backside has a longer metal edge for reinforcement, making it especially great for wall mounting and hanging overhead. Plus, it is lightweight; however, for widths longer than 4ft., it is not recommended to be used as a free-standing display without a support because of its thin profile width. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).


Package Includes:

• (1) 4-Sided Frame
• (1) Custom Single-Sided Graphic (SEG hem)
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Hardware Setup: Take two VAIL-60S extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.


Warranty: Lifetime on frame; one (1) year on graphics


Frame Size: 60″W x 120″H x 2.36″D 


Artwork Size: 62″W x 110″H 


Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

Vail-60S 5′ x 9′ Frame Only. The VAIL-60S is a single-sided extrusion with a profile width of 60mm and has a solid outside finish. Because the back side of the VAIL-60S is short, it works especially well for wall mounting letting you affix the frame in multiple ways; however, the VAIL-60S is suitable for free-standing or hanging overhead as well. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).

Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: Take two VAIL-60S extrusions and slide ein Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 60″W x 108″H x 2.36″D

Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

Single-Sided Graphic Replacement for the Vail-60S 5’ x 10’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:

• (1) Custom Single-Sided Graphic with SEG hem

Material: Deco Fabric (non-stretch)

Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size:62″W x 122″H

Shipping Dimensions: 20″L x 10″W x 6″H

Shipping Weight:4 lbs

Vail-60S 5′ x 10′ Frame Only. The VAIL-60S is a single-sided extrusion with a profile width of 60mm and has a solid outside finish. Because the back side of the VAIL-60S is short, it works especially well for wall mounting letting you affix the frame in multiple ways; however, the VAIL-60S is suitable for free-standing or hanging overhead as well. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).

Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: Take two VAIL-60S extrusions and slide ein Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 60″W x 108″H x 2.36″D

Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

VAIL-60S 6′ x 9’ Single-Sided Graphic Package. With a solid outside finish unlike the ASPEN-40D, the VAIL-60S is a single-sided extrusion with a profile width of 60mm. The VAIL-60S is rigid because its backside has a longer metal edge for reinforcement, making it especially great for wall mounting and hanging overhead. Plus, it is lightweight; however, for widths longer than 4ft., it is not recommended to be used as a free-standing display without a support because of its thin profile width. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).


Package Includes:

• (1) 4-Sided Frame
• (1) Custom Single-Sided Graphic (SEG hem)
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Hardware Setup: Take two VAIL-60S extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.


Warranty: Lifetime on frame; one (1) year on graphics


Frame Size: 72″W x 108″H x 2.36″D 


Artwork Size: 74″W x 110″H 


Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

Single-Sided Graphic Replacement for the Vail-60S 6’ x 9’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:

• (1) Custom Single-Sided Graphic with SEG hem

Material: Deco Fabric (non-stretch)

Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size:74″W x 110″H

Shipping Dimensions: 20″L x 10″W x 6″H

Shipping Weight:4 lbs

Vail-60S 6′ x 9′ Frame Only. The VAIL-60S is a single-sided extrusion with a profile width of 60mm and has a solid outside finish. Because the back side of the VAIL-60S is short, it works especially well for wall mounting letting you affix the frame in multiple ways; however, the VAIL-60S is suitable for free-standing or hanging overhead as well. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).

Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: Take two VAIL-60S extrusions and slide ein Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 

Vail-60S 5′ x 8′ Frame Only. The VAIL-60S is a single-sided extrusion with a profile width of 60mm and has a solid outside finish. Because the back side of the VAIL-60S is short, it works especially well for wall mounting letting you affix the frame in multiple ways; however, the VAIL-60S is suitable for free-standing or hanging overhead as well. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Frame Includes:

• (1) 4-Sided Frame
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: Take two VAIL-60S extrusions and slide ein Corner Connector; tighten. Repeat this three times.

Upgrade to Replace: VAIL Toolless Corner Connector

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 72″W x 108″H x 2.36″D

Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

VAIL-60S 6′ x 10’ Single-Sided Graphic Package. With a solid outside finish unlike the ASPEN-40D, the VAIL-60S is a single-sided extrusion with a profile width of 60mm. The VAIL-60S is rigid because its backside has a longer metal edge for reinforcement, making it especially great for wall mounting and hanging overhead. Plus, it is lightweight; however, for widths longer than 4ft., it is not recommended to be used as a free-standing display without a support because of its thin profile width. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).


Package Includes:

• (1) 4-Sided Frame
• (1) Custom Single-Sided Graphic (SEG hem)
• (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Hardware Setup: Take two VAIL-60S extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.


Warranty: Lifetime on frame; one (1) year on graphics


Frame Size: 72″W x 120″H x 2.36″D 


Artwork Size: 74″W x 122″H 


Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H