This display stand features a 1/4" top loading slot that accepts foam core boards and signs. Graphics must be mounted to 1/4" board. IS-1 stands 60" high from the ground.

Graphic area:
22"W x28"h

Base Size:
10"W x 14"H

Similar to IS-1 display stand, the IS-2 features a 1/4" top loading slot that accepts foam core boards and signs.  Graphics must be mounted to 1/4" board.

Graphic:
22"W x 28"H

Display Stand:
Stands 60"H from the ground

The Berty Snap Frame is versatile and offers both horizontal and vertical graphic display with the help of a rotating hinge.

Sturdy aluminum construction holds one piece of paper Vertical 8.5" x 11".

Holds up to 8 3/4" x 12", viewable area 8 1/4" x 11 3/4".

Angle can be adjusted from vertical to horizontal Height adjustable from 34" to 48" with 19 separate height adjustments Base 10" diameter

This display stand features a 1/4" top loading slot that accepts foam core boards and signs. Graphics must be mounted to 1/4" board. IS-1 stands 60" high from the ground.

Graphic area:
22"W x28"h

Base Size:
10"W x 14"H

Pocket Trim for Falcon 7ft. Banner Stand - 100 in. (55 in. Straight cut, 45 in. Bias)

This Pocket Trim Fabric is black and is the perfect fit for a Large Feather Banner Flag.

This is the flag trim (aka banner pocket trim) we use to finish our Falcon banner flags. Only available in Black.

This Pocket Trim Fabric is black and is the perfect fit for a Small Feather Banner Flag.

Add extra oomph to any size Casita Canopy by attaching a flag! To attach a flag*, first add this Casita Canopy Flag Connector. Place this Flag Connector at the desired height onto the leg of the frame. Then, simply twist included knobbed screws to tighten. Add the flag and voila!

Please note:
1. *Use with Small Feather Banner Flag ONLY.
2. Open Casita fully and add canopy top, back wall and half-side walls before attaching Flag Connector.
3. This add-on has a toolless assembly
4. Pole Length: 7.75"
5. Hole Diameter: 1"

This Splash Outdoor Banner Stand is great for indoor and outdoor use. Slide the banner onto the top perpendicular bar, then fastened to the pole using the 8 included plastic clips. As you might tell, the banner flag is very secure and displays proudly and fully with help of the top bar. The pole height can be adjusted from 4.1 ft. to 10.4 ft. From the drop down menu, choose either a single-sided or double-sided custom printed banner flag with heights ranging from 5 ft. to 8 ft. The flag width is 32 inches.

Includes:

• Printed Graphic Flag (single- or double-sided, please choose from drop down, then click "Update price" for total charge.)

Warranty: One (1) year on graphics

Banner Size: Varies; please see drop down selection