This is the hardware for the 13ft Mondo Banner Stand.

Display Size: 2.92' x 13'
Diameter of Base: 25"

Includes:
Water Base which can hold up to 13 gallons of water
Pole with plastic end caps
4 Aluminum support legs with plastic clips
9 plastic ring clips
Base Bag (32" x 16")
Pole Bag (66" x 5")

Warranty: One (1) year on hardware and graphics

Weight:
28 lbs (Pole 11 lbs + Base 15 lbs)

Shipping Dimensions:
26"L x 26.25"W x 10.5"H
*Ships in 2 cases

This is the hardware for the 17ft. Mondo Banner Stand.

Includes:

• Water base which holds up to 13 gallons of water
• Pole with plastic end caps
• 4 aluminum support legs with plastic clips
• 10 large plastic ring clips for sides
• 5 small plastic ring clips for top
• Base bag (32" x 16")
• Pole bag (66" x 5")

Warranty: One (1) year on hardware

Weight:
Stand: 40 lbs (Pole, 16 lbs + Base, 24 lbs)

This Large Mamba banner stand outdoor flag comes with a single-sided custom print, stand and x-base. Use this 16.8 ft. tall flag on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Includes:

• Aluminum Pole
• X-base
• Printed Banner (Single-Sided; Note: This display DOES NOT have a double-sided option.)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55"
Height: 16.8 ft.

Graphic Banner (Finished Size):
30.5"W x 176"H

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 12"L x 3"W x 45"H

This Single-Sided printed graphic is a replacement graphic for the Large Mamba Banner Stand. (Note: This display DOES NOT have a double-sided option.)

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

Graphic Banner (Finished Size): 31.5"W x 176"H

Graphic Turnaround Time: 2 Business Days

This is the hardware for the Large Mamba Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.

Total Size:
Width (including base): 55"
Height: 16.8 ft.

Includes:

• Aluminum Pole
• X-base
• Black travel bag (36 1/2" x 10" x 4 1/2")

Shipping Dimensions: 10"L x 4"W x 42"H

Warranty: One (1) year on hardware

This Single-Sided printed graphic is a replacement graphic for the Small Mamba Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

Graphic Banner (Finished Size): 30.5"W x 97"H

Graphic Turnaround Time: 2 Business Days

This is the hardware for the Large Mamba Banner Stand with Spike base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Aluminum Pole
• Spike base
• Black travel bag (36 1/2" x 10" x 4 1/2")

Total Size:
Width (including base) : 55"
Height: 16.8 ft.

Shipping Dimensions: 12"L x 3"W x 45"H

Warranty: One (1) year on hardware

This is the hardware for the Medium Mamba Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.

Includes:

• Aluminum Pole
• X-base
• Black travel bag (36 1/2"W x 10"L x 4 1/2"D)

Total Size:
Width (including base): 55"
Height: 13.5 ft.

Shipping Dimensions: 10"L x 3"W x 45"H

Warranty: One (1) year on hardware

This Small Mamba Banner Stand outdoor flag comes with a single-sided custom print, stand and X-base. Use this 10.125 ft. tall flag on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Includes:

• Aluminum Pole
• X-base
• Printed Banner (Single-Sided)
• Black travel bag (36 1/2" x 10" x 4 1/2")

Warranty: One (1) year on hardware and graphics

Total Display Size:
Width (including base): 55""
Height: 10.125 ft.

Graphic Banner (Finished Size): 30.5"w x 97"h

Graphic Turnaround Time: 2 Business Days

Shipping Dimensions: 10"L x 4"W x 42"H

This is the hardware for the Medium Mamba Banner Stand with Spike base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Aluminum Pole
• Spike base
• Black travel bag (36 1/2"W x 10"L x 4 1/2"D)

Total Size:
Width (including base): 55"
Height: 13.5 ft.

Shipping Dimensions: 10"L x 3"W x 45"H

Warranty: One (1) year on hardware