​

This Single-Sided printed banner is a replacement graphic for the Large Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This Double-Sided printed banner is a replacement graphic for the Large Feather Banner Stand.

Material: Mesh Fabric, Dye-Sublimation

Warranty: One (1) year on graphics

​

This is the hardware for the Extra-Large Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.

Includes:

• Pole
• Spike base
• Nylon bag

Heights: 19.7 ft.

Warranty: One (1) year on hardware

​

This 16.4ft Large Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X Base
• Printed Banner (Double-Sided)
• Nylon Bag

Height:  16.4 ft.

Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year warranty on hardware and graphics

​

This is the hardware for the Large Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 16.4 ft.
Includes:

• Pole
• X-base
• Nylon bag

Height: 16.4 ft.

Warranty: One (1) year on hardware

​

This Medium Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Package includes:

• Pole
• X Base
• Printed Banner (Single-Sided)
• Nylon Bag

Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year on hardware and graphics

​

This 15.75 ft. Medium Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.

Package includes:

• Pole
• X Base
• Printed Banner (Double-Sided)
• Nylon Bag

Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")

Warranty: One (1) year warranty on hardware and graphics

Option Base: Water Base hold up to about 2.5 gallons of water.