The Silverstep Magnetic Connector allows you to link together two or more Silverstep stands to create a backdrop display. Remove one regular end cap from two stands, and replace with one Silverstep Magnetic Connector.

Available for all size widths, you can mix and match sizes to accommodate almost any trade show booth size. Graphic change-out is easy and enables you to have a fresh look at each event.

This black nylon sand bag cover is used to protect your sand bag as well as to easily attach your sand bag to one leg of the Casita Canopy for added weight against wind. Included is the cover and hook. Do not fill this cover with sand. To use, slip hook through the grommet located on the handle of the cover and then close hook around leg of casita canopy. With the cover already on the ground, open velcro opening and place sand bag* inside the cover. Close velcro opening, and you’re done.

Dimensions:
11″L x 11″W x 6″H

*Sand and sand bag are not included with the cover, nor do we sell sand bags or sand.

This is one replacement support pole for the 24″w Silverstep Retractable Banner Stand.


Pole has 4 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 2 graphic heights: 85″h or 92″h. 

When adding a custom back wall and/or half-side wall(s), this Rail is a must-have for the 10ft Casita Canopy. To Position, first clamp snap rings around the legs of the frame. Slide Rail through the pole pocket expertly sewn on the top of the back wall and/or half-side walls. Bring Rail with fabric up to clamp snap rings, and tighten ends with knobbed screws. This add-on has a toolless assembly.

1 Rail includes:

• Aluminum Rail (left side, right side & rail connector)
• 2 snap rings

1 Rail for 1 Backwall (bottom)
2 Rails for 1 Sidewall (top & bottom)

Shipping dimensions for 2 sets of Rails
58″ x 5.25″ x 2.5″

Shipping dimensions for 5 Rails
58″ x 6″ x 6″

This is one replacement support pole for the 36″w Silverstep Retractable Banner Stand.


Pole has 2 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 5 graphic heights: 69″h, 72″h, 80″h, 84″h or 92″h. 

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!