blog

Aspen Silver Light – Small (50 W)

Posted on by

60a

Spotlight your graphics like artwork in a museum!

The Aspen Small Light consumes 50 watts, is halogen, and has a slender Silver body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.

Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup. 

Ceiling Hook for Aspen

Posted on by

Use this ceiling hook to hang any Aspen Fabric Frame. Twist the screw into the square washer and slide into groove to connect. Use 1, 2 or 4 ceiling hooks.

Color: Silver

Flat Foot for Aspen

Posted on by

59d

Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Frame sits low toward the floor when using Flat feet. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side. Largest widths may need 3 feet.

Color: Silver
Weight: 1.5 lbs

Dimensions: 6.25″ W x 19.625″ Length

Weight:
1.5 lbs

 

Side Foot for Aspen

Posted on by

59c

Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Side feet add a different look than feet that install underneath the frame. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side.

Color: Silver
Weight: 1.5 lbs

Wall Mount for Aspen

Posted on by

Hang the Aspen on the wall using Aspen Wall Mount Accessory. Sold in quantities of 1, it is recommended to purchase 4 wall mounts—one in each corner—to properly mount fixture to wall and display Aspen SEG Fabric Frame as intended.



To install:

After you make your necessary measurements, screw the wall mounts into the wall, place the frame around mounts, tighten socket screws slightly to add pressure to frame, then install graphics. Note: You may want to hold the frame (sans graphics) up on the wall while you are deciding on the placement of the wall mounts. Just be sure that the wall mounts are on the inside of the frame, and the vertical screws (which work by applying pressure to the frame) will be able to touch the frame.

Ultra Hook And Loop Banner Stand 24in – Black

Posted on by

1" Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides ($2.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.

Spring-loaded telescopic back leg insures graphic tension "Footless" Design, floor-to-top graphics Fully adjustable, hook loop included Strong-Rigid-Simple

Weight: 7 Lbs.

Size:
Width 24"
Height adjustable from 48" to 96"

Stand Color: BLACK ONLY

Graphics turnaround:
2 business days after proofs are approved. Please call for production schedule if you need it sooner.

Loop Velcro

Posted on by

57

1″ Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides (Call Us on number to get Customised Quote.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.

Hook Velcro

Posted on by

58

1″ Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides (Call Us on number to get Customised Quote.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.