VAIL 60D 8 ft. x 10 ft. Single-Sided Graphic Package


VAIL-60D 8’ x 10’ Single-Sided Graphic Package. The VAIL-60D is a double-sided extrusion with a profile width of 60mm. This extrusion has a solid outside finish. VAIL-60D is best for standing independently since the profile width is just wide enough to provide ultimate stability. This extrusion works great overhead too because the thick profile width really stands out. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).  

Package Includes:

  • (1) 4-Sided Frame
  • (1) Custom Single-Sided Graphic (SEG hem)
  • (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
  • (2) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Material: Deco Fabric (non-stretch) 

Print Process: Full Color Dye Sublimation 

Hardware Setup: To make one edge of the frame, take two cut VAIL-60D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 10’ edge and one 8′ edge and slide in Corner Connector; tighten. Repeat this three times. 

Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector. 

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. 

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 96″W x 120″H x 2.36″D 

Artwork Size: 98″W x 122″H 

Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H