VAIL 120D 8 ft. x 8 ft. Double-Sided Graphic Package
Vail-120D 8’ x 8’ Double-Sided Graphic Package. Vail-120D is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit).Â
Package Includes:
- (1) 4-Sided Frame
- (2) Custom Single-Sided Graphics (SEG hem)
- (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material: Deco Fabric (non-stretch)Â
Print Process: Full Color Dye SublimationÂ
Hardware Setup: Take two VAIL-120D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector.
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side.Â
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.Â
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 96"W x 96"H x 4.72"D
Artwork Size: 98"W x 98"HÂ
Shipping Dimensions: (1) box 96"L x 7.25"W x 6.5"H
VAIL 60D 8 ft. x 8 ft. Double-Sided Graphic Package
VAIL-60D 8’ x 8’ Double-Sided Graphic Package. The VAIL-60D is a double-sided extrusion with a profile width of 60mm. This extrusion has a solid outside finish. VAIL-60D is best for standing independently since the profile width is just wide enough to provide ultimate stability. This extrusion works great overhead too because the thick profile width really stands out. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).
Package Includes:
- (1) 4-Sided Frame
- (2) Custom Single-Sided Graphics (SEG hem)
- (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material: Deco Fabric (non-stretch)
Print Process: Full Color Dye SublimationÂ
Hardware Setup: Take two VAIL-60D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector.
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side.Â
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.Â
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 96"W x 96"H x 2.36"DÂ
Artwork Size: 98"W x 98"HÂ
Shipping Dimensions: (1) box 96"L x 7.25"W x 6.5"H
Roll Of Magnets for Wave Pop Up Display Panels
Pop Up Display 6ft/8ft. Tabletop Blue – 1 Fabric End Panel
Replacement panels for 8ft and 6ft Tabletop Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.
Please specify center or end cap panel when ordering as well as fabric color.
Qty 1= 1 fabric panel.
Ex.
8ft Tabletop Pop Up display requires qty 3 center panels/qty 2 end cap panels.
6ft Tabletop Pop Up display requires qty 2 center panels/qty 2 end cap panels
Pop Up Display 6ft/8ft. Tabletop Silver – 1 Fabric End Panel
Replacement panels for 8ft and 6ft Tabletop Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.
Please specify center or end cap panel when ordering as well as fabric color.
Qty 1= 1 fabric panel.
Ex.
8ft Tabletop Pop Up display requires qty 3 center panels/qty 2 end cap panels.
6ft Tabletop Pop Up display requires qty 2 center panels/qty 2 end cap panels
Pop Up Display Podium – Fabric Graphic Only
This is Fabric Print wrap for Hard Case.
Case:
Molded plastic hard carry case with inset wheels for easy mobility. Case also has a center grip.
Case Outside Dimensions: 39""H x 27.5W x 15.75""D
Case Inside Dimensions: 31.75""H x 25W x 14.25""D
Weight: 31 lbs
Pop Up Display Podium Graphic Package (PVC)
Full printed graphic wrap (PVC) on Podium for Trade Show Pop Up Displays.
Podium Graphics:
Printed on PVC
Pop Up Display Tabletop 8 ft. – Fabric Panel Only – Black
Product Features:
Display Height: 5′
Display Width: 8′
Includes:Â
- (3) Graphic Center Panels (Laminated Display Film)
- (2) Graphic End Panels (Laminated Display Film)
Graphics Turnaround Time:
2 business days after proofs are approved.
Please call for production schedule if you need it sooner. Rush charges apply.
Warranty:
Frame – Lifetime warranty
Fabric Panel for 8ft/10 ft. Wave Pop Up Display – Front – Blue – 1 End Panel
Replacement panels for 8ft/10ft Big Wave Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.
Please specify center or end cap panel when ordering as well as fabric color.
8ft Wave Pop Up display
Complete set: Qty 3 center panels + Qty 2 end cap panels
10ft Wave Pop Up display
Complete Set: Qty 4 center panels+Qty 2 end cap panels
Channel Bars for backside
if ordering panels for backside, you need the following qty of channel bars.
9' Straight  - 6 Horizontal Bars + 6 Vertical Bars
10' Wave - Need 9 Bars
8' Wave - Need 6 Bars
