This black nylon sand bag cover is used to protect your sand bag as well as to easily attach your sand bag to one leg of the Casita Canopy for added weight against wind. Included is the cover and hook. Do not fill this cover with sand. To use, slip hook through the grommet located on the handle of the cover and then close hook around leg of casita canopy. With the cover already on the ground, open velcro opening and place sand bag* inside the cover. Close velcro opening, and you’re done.

Dimensions:
11″L x 11″W x 6″H

*Sand and sand bag are not included with the cover, nor do we sell sand bags or sand.

This is one replacement support pole for the 24″w Silverstep Retractable Banner Stand.


Pole has 4 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 2 graphic heights: 85″h or 92″h. 

When adding a custom back wall and/or half-side wall(s), this Rail is a must-have for the 10ft Casita Canopy. To Position, first clamp snap rings around the legs of the frame. Slide Rail through the pole pocket expertly sewn on the top of the back wall and/or half-side walls. Bring Rail with fabric up to clamp snap rings, and tighten ends with knobbed screws. This add-on has a toolless assembly.

1 Rail includes:

• Aluminum Rail (left side, right side & rail connector)
• 2 snap rings

1 Rail for 1 Backwall (bottom)
2 Rails for 1 Sidewall (top & bottom)

Shipping dimensions for 2 sets of Rails
58″ x 5.25″ x 2.5″

Shipping dimensions for 5 Rails
58″ x 6″ x 6″

This is one replacement support pole for the 36″w Silverstep Retractable Banner Stand.


Pole has 2 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 5 graphic heights: 69″h, 72″h, 80″h, 84″h or 92″h. 

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.

Features

Material: Aluminum

Length: 16 in.

Compatible with: Vail-100D profile width (100mm).

​

Casters for Aspen T-Legs (1 set includes 4 wheels)

Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.

Features

Material: Aluminum

Length: 16 in.

Compatible with:

• Vail-120D profile width (120mm)
• Mammoth Modular Displays

Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.

*Custom sizes are available. Ask our sales department!

Give your graphics a beautiful white glow with this energy efficient and powerful LED light! Its wider head allows for broader range of shining light. Stylish and compact, this light comes equipped with a convenient on-off switch and a 270 degree adjustable head. AC Power adapter included.

Power cord length: 11’4”

Body Color: White

Adapter clip specifically for Aspen SEG Frames is also included.

Use for Aspen Fabric Frame 4 ft. or wider.

Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.

Features

Material: Aluminum

Length: 12 in.

Compatible with:

• Vail-40D profile width (40mm)
• Aspen SEG Fabric Frames

Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.

Features

Material: Aluminum

Length: 12 in.

Compatible with: Vail-60D profile width (60mm)

Spotlight your graphics like artwork in a museum!

The Aspen Small Light consumes 50 watts, is halogen, and has a slender Black body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.

Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup. 

Spotlight your graphics like artwork in a museum!

The Aspen Large Light is halogen, consumes 150 watts, has a larger head and a slender Silver body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.

Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup. 

Spotlight your graphics like artwork in a museum!

The Aspen Large Light is halogen, consumes 150 watts, has a larger head and a slender Black body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.

Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup. 

​

Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Curved feet add a stylish appeal and a little height as well. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side. Largest widths may need 3 feet.

Color: Silver
Weight: 1.5 lbs

Aspen LED Light

Spotlight your graphics like artwork in a museum!

The Aspen Small Light consumes 50 watts, is halogen, and has a slender Silver body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.

Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup. 

Aspen Fabric Frame LED Light — BLACK

​

Use this ceiling hook to hang any Aspen Fabric Frame. Twist the screw into the square washer and slide into groove to connect. Use 1, 2 or 4 ceiling hooks.

Color: Silver

Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Frame sits low toward the floor when using Flat feet. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side. Largest widths may need 3 feet.

Color: Silver
Weight: 1.5 lbs

Dimensions: 6.25″ W x 19.625″ Length

Weight:
1.5 lbs

Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Side feet add a different look than feet that install underneath the frame. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side.

Color: Silver
Weight: 1.5 lbs

​

Hang the Aspen on the wall using Aspen Wall Mount Accessory. Sold in quantities of 1, it is recommended to purchase 4 wall mounts—one in each corner—to properly mount fixture to wall and display Aspen SEG Fabric Frame as intended.

To install:

After you make your necessary measurements, screw the wall mounts into the wall, place the frame around mounts, tighten socket screws slightly to add pressure to frame, then install graphics. Note: You may want to hold the frame (sans graphics) up on the wall while you are deciding on the placement of the wall mounts. Just be sure that the wall mounts are on the inside of the frame, and the vertical screws (which work by applying pressure to the frame) will be able to touch the frame.

1″ Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides (Call Us on number to get Customised Quote.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.

1″ Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides (Call Us on number to get Customised Quote.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.

Brass Grommets come as one (1) set which include the top and bottom rings. 2 rings = 1 each

Silver Grommets come as one (1) set which include the top and bottom rings. 2 rings = 1 each

How many pole pockets would you like? Please enter the quantity of sides.

1″ Velcro strips have adhesive backing that can stick to vinyl banners, laminated prints, pvc, and can be sewn onto fabric!

By selecting this item, you with get both Hook & Loop by the foot.

Note: Available in white only, Quantity 1 = 1 foot

Hem & Grommets are priced by linear foot. Please enter the amount of linear feet you will need in the box.
Ex. 12 LF = 12 Qty.

Black Grommets come as one (1) set which include the top and bottom rings. 2 rings = 1 each

Hemming is a complimentary service. Please enter the amount of linear feet you will need hemmed in the box.
Ex. 12 LF = 12 Qty.

Magnetic strips on sides of panels magnetically attach to channel bars on frame. Price is per linear foot.

Equipped with two wheels, a short handle and a side carry strap, this 8ft EZ Tube Tabletop Bag used for a 8ft Tabletop-style EZ Tube.

This black nylon carry bag will help you transport your Newyorkbannerstands hanging banner to and from your event with ease. Securely keep all display accessories and graphics inside, all in one place. Long handle straps allow you to carry the display over shoulder or by hand.

Product Overview:
Optimize your black Medium Hard Case with a graphic wrap! Selecting this item will give you the stretch fabric graphic wrap that you need to dress up your case, helping you to proudly display it as a podium. So, get the most use out of your investment instead of trying to store it behind another display until the event is over.

Because of the fabric nature of this wrap, the finishing is created like a pillowcase in which you will slip the graphic completely over the lid and body and pull down toward the floor; elastic lines the inside of the hem around the bottom, holding the graphic in place. For the top oval portion, choose white, black or printed graphic.

Please note: By choosing the stretch fabric graphic wrap, you will not be able to access the inside of the case once it is in place.

Need to access the inside of your case and you want a graphic wrap? No problem! Try the graphic wrap made out of PVC or Laminated Display Film.

Template Size:
62.375″W x 32.25″H

Graphic Turnaround Time:
2 Business Days

Product Overview:
The Medium Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility. It’s oval shape fits some of our larger displays. Lock and key included.

PVC graphic wrap is finished with hook and loop at both vertical ends so that you may seal it closed at the back to hold to the case. You can access the inside of your hard case at any time by simply lifting the lid.

Weight:
31 lbs

Case Outside Dimensions:
22″W x 39″H x 17″D

Case Inside Dimensions:
20.5″W x 32.5″H x 12″D

This Case For:
(1) Medium Ready Pop, or (1) Large Ready Pop, or (1) 8ft. EZ Tube, or (1) 10ft. EZ Tube, or (1) 20ft RPL.

Optimize your black Medium Hard Case with a graphic wrap! Selecting this item will give you the Laminated Display Film graphic wrap that you need to dress up your case, helping you to proudly display it as a podium. So, get the most use out of your investment instead of trying to store it behind another display until the event is over.

Hook and loop finishes this vibrant print at both vertical ends so that you may seal it closed at the back. Choosing the Laminated Display Film graphic wrap will give you access to the inside of your hard case at any time by simply lifting the lid.

Looking for a different material? No problem! Try the graphic wrap made out of Stretch Fabric or PVC.
Template Size:
62.375″W x 32.25″H

Graphic Turnaround Time
2 Business Days

Optimize your black Medium Hard Case with a graphic wrap! Selecting this item will give you the PVC graphic wrap that you need to dress up your case, helping you to proudly display it as a podium. So, get the most use out of your investment instead of trying to store it behind another display until the event is over.

Hook and loop finishes this vibrant print at both vertical ends to that you may seal it closed at the back. Choosing the PVC graphic wrap will give you access to the inside of your hard case at any time by simply lifting the lid.

Looking for a different material? No problem! Try the graphic wrap made out of Stretch Fabric or Laminated Display Film.
Template Size:
62.375″W x 32.25″H

Graphic Turnaround Time
2 Business Days

Equipped with two wheels, a short handle and a side carry strap, this 10ft EZ Tube Bag Straight used for an 8ft or 10ft Straight-style EZ Tube.

Size:
Inside Dimensions: 48″W x 12″H x 6″D

Weight:
10 lbs

​

Product Features
La Caja (pronounced “la ca-ha”) is a hard, molded plastic carry case with wheels, shaped and developed to transport a 10’ x 10’ canopy more easily. Grip the soft handle to push or pull La Caja as it smoothly maneuvers through narrow paths. It’s rectangle shape and inset wheels make it easy to stack or pack, fitting in spaces a rounded hard case won’t. A two-piece box, place the lid over the bottom; luggage straps with clip buckle ends, secured in harness slots, wrap around case and lock.

Weights – Dimensions

• Case Outside Dimensions: 67 “x 18” x 11.5”
• Case Inside Dimensions: 64” x 16.5 “ x 10”
• Shipping Weight: 21 lbs
• Shipping Dimensions: 67” x 18” x 11.5”

Package Includes

• (1) Molded case with wheels and straps

Applications

• 10 ft. x 10 ft. Canopy
• Resort Extrusions: Aspen, Vail, Mammoth, Whistler, Big Sky

Product Overview:
The Medium Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility. It’s oval shape fits some of our larger displays. Lock and key included.

Laminated Display Film graphic wrap is finished with hook and loop at both vertical ends so that you may seal it closed at the back to hold to the case. You can access the inside of your hard case at any time by simply lifting the lid.

Weight:
31 lbs

Case Outside Dimensions:
22’W x 39″H x 17″D

Case Inside Dimensions:
20.5″W x 32.5″H x 12″D

This Case For:
(1) Medium Ready Pop, or (1) Large Ready Pop, or (1) 8ft. EZ Tube, or (1) 10ft. EZ Tube, or (1) 20ft RPL.

Equipped with two wheels, a short handle and a side carry strap, this 10ft EZ Tube Bag Curved used for an 8ft or 10ft Curved-style EZ Tube.<br /><br /><span style=”font-weight: bold;”>Size:</span><br />Inside Dimensions: 48″W x 12″H x 6″D<br /><br /><span style=”font-weight: bold;”>Weight: </span><br />10 lbs

Equipped with a shoulder carry strap, this 48″ Silver Travel Bag can be used for 48″ width Silverstep Retractable Banner Stands and 4ft width EZ Extends.

Size:
Inside Dimensions: 50.75″L x 10″W x 3″H
Outside Dimensions: 51.5″L x 12″W x 4″H
Shipping Dimensions 64″L x 12″W x 4″H

Weight:
7 lbs

Equipped with two wheels, a short handle and a side carry strap, this 60″ Silver Travel Bag can be used for 60″ width Silverstep Retractable Banner Stands and 5ft width EZ Extends.

Size:
Inside Dimensions: 62″L x 10″W x 3″H
Shipping Dimensions 64″L x 12″W x 4″H

Weight:
9 lbs

Molded plastic hard carry case with inset wheels for easy mobility. Case also has a center grip.

Case Outside Dimensions: 39″H x 27.5W x 15.75″D

Case Inside Dimensions: 31.75″H x 25W x 14.25″D

Weight: 36 lbs

Equipped with a shoulder carry strap, this 33.5″ Silver Travel Bag can be used for 33.5″ width Silverwing Retractable Banner Stands both Single and Double sizes, and the Maui Retractable Banner Stand.

Weight:
6 lbs

Equipped with a shoulder carry strap, this 24″ Silver Travel Bag can be used for 24″ width Silverstep Retractable Banner Stands and 2ft width EZ Extends.

Size:
Inside Dimensions: 28.5″L x 12″W x 4″H

Weight:
5 lbs

This hard carrying case is for the Silverwing Rectractable Banner Stand in sizes Single and Double. Only one item will fit in each case, and this hard carry case only fits the Silverwing style roll up stand.

Outside Dimensions:
37″W x 11.5″H x 5″D

Inside Dimensions:
36.75″W x 8.25″H x 3.5″D

Weight: 14lbs

Molded plastic hard carry case with inset wheels for easy mobility.
Case also has a center grip.
Dimensions:
Case Outside Dimensions: 16.5″W x 38.5″H x 15.75″D
Case Inside Dimensions: 14″W x 34″H x 13″D

Weight:
24 lbs

This Case for:
6ft & 8ft Tabletop Pop Up Displays
Ready Pop Fabric Display (Small, Medium Straight & Curved)

Equipped with a shoulder carry strap, this 36″ Silver Travel Bag can be used for 36″ width Silverstep Retractable Banner Stands, the 3ft width EZ Extends and the 36″ L-Stand.

Size:
Inside Dimensions: 39″L x 10.5″W x 3″H
Outside Dimensions: 41″L x 12″W x 4″H

Weight:
6 lbs

The Medium Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility. It’s oval shape fits some of our larger displays. Lock and key included.

Weight:
31 lbs

Case Outside Dimensions:
22″W x 39″H x 17″D

Case Inside Dimensions:
20.5″W x 32.5″H x 12″D

This Case for:
(1) Medium Ready Pop, or (1) Large Ready Pop, or (1) 8ft. EZ Tube, or (1) 10ft. EZ Tube, or (1) 20ft EZ Tube.

Looking for a graphic wrap to go with it? Click back a page to select the option for Medium Hard Case with 1. Stretch Fabric Wrap, 2. PVC Wrap, or 3. Laminated Display Film Wrap

Enter the square foot quantity (in whole numbers) of how much Super Flat material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 15 oz
Printing Process: UV Cured
Finish: Matte
Maximum Media Width: 86″
Recommended for:

• L Banner Stands
• Silverstep Retractable Banner Stands
• Steppy Retractable Banner Stands
• Econo Roll Retractable Banner Stands
• Baby Step Retractable Banner Stands
• Contour Retractable Banner Stands
• Portable Retractable Banner Stands
• Maui Retractable Banner Stands
• Silverwing Retractable Banner Stands
• Doublestep Retractable Banner Stands

Recommended for indoor use.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Enter the square foot quantity (in whole numbers) of how much Stretch material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 8.08 oz
Printing Process: Dye Sublimation, Direct-to-Fabric
Finish: Soft Look, Bright Colors
Maximum Media Width: 122″
Also Known As: Tension Fabric
Other: Knit, 100% Polyester
Recommended for:

• Classic Tahoe Modular Displays
• Tahoe Twistlock Displays
• RPL Fabric Pop Up Displays
• Ready Pop Fabric Pop Up Displays
• EZ Tube Displays
• Newyorkbannerstands Hanging Banners
• Wallbox Fabric Displays
• Table Throws (Custom)
• Table Runners

Recommended for indoor use.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket. Please keep important information 4.5″ away from edges where pole pockets will be placed.)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Enter the square foot quantity (in whole numbers) of how much Mesh material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 0.135 mm (5.3 mil)
Printing Process: Dye Sublimation, Direct-to-Fabric
Finish: Soft Look, Bright Colors
Maximum Media Width: 126″
Also Known As: Flag Material
Other: 100% Polyester Knit Mesh (Non-Stretch)
Recommended for:

• Falcon Flags
• Feather Flags
• Teardrop Flags
• Mamba Flags
• Mondo Flags
• Store Front Flag
• Splash Flag

Great for indoor or outdoor use. Great ink penetration.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Blockout Liner (for between double-sided mesh flag graphics)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Enter the square foot quantity (in whole numbers) of how much Laminate material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.


Features
Thickness: 22 mil
Printing Process: Digital inkjet, cold-process lamination
Finish: Smooth, matte
Maximum Media Width: 34″W
Other: Polycarbonate Laminate on titanium film w/ blockout backer
Recommended for: Big Wave Pop Ups

Finishing:
Hook & Loop (included)
Magnetic strips on back (for an additional cost)
Top and bottom hanging hardware (for an additional cost)

Printing Process: None
Finish: Hidden between fabric
Maximum Media Width: 59″w

For use between double-sided Mesh fabric

Finishing: Hemming

Enter the square foot quantity (in whole numbers) of how much Scrim material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 13 oz
Printing Process: UV Cured
Finish: Matte, Textured Material
Maximum Media Width: 124″
Also Known As: Banner Vinyl
Recommended for: 

• Zephyr Banner Stand
• Zeppy Banner Stand
• Grasshopper Adjustable Banner Stands
• Econom-X Banner Stand
• X Banner Stands
• Zen Bamboo Banner Stand
• Foundation Outdoor Banner Stand

Great for indoor or outdoor use.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Enter the square foot quantity (in whole numbers) of how much Banner material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features

Thickness: 7 oz

Printing Process: Dye Sublimation, Direct-to-Fabric

Finish: Satin, matte

Maximum Media Width: 70″

Also Known As: Banner Fabric, Satin, or Retractable Fabric

Other: Weave

Recommended for:

• Silverstep Retractable Banner Stands
• Silverwing Retractable Banner Stands
• Doublestep Retractable Banner Stands
• Classic Banner Stands
• Ninja Star Double Sided
• L Banner Stands
• Promo Double Indoor Banner Stand

Great alternative to Super Flat. Recommended for indoor use.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

This hard copy proof is a small-scale graphic print. A hard copy proof can be very helpful in deciding which material to choose before placing your order.

Select a material from the drop-down menu and add to cart.

*Hard Proofs add a day to the approval process

Enter the square foot quantity (in whole numbers) of how much Stretch material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 8.08 oz
Printing Process: Dye Sublimation, Direct-to-Fabric
Finish: Soft Look, Bright Colors
Maximum Media Width: 122″
Also Known As: Tension Fabric
Other: Knit, 100% Polyester
Recommended for:

• Classic Tahoe Modular Displays
• Tahoe Twistlock Displays
• RPL Fabric Pop Up Displays
• Ready Pop Fabric Pop Up Displays
• EZ Tube Displays
• Newyorkbannerstands Hanging Banners
• Wallbox Fabric Displays
• Table Throws (Custom)
• Table Runners

Recommended for indoor use.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket. Please keep important information 4.5″ away from edges where pole pockets will be placed.)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

*Printing actual PANTONE colors is NOT included.
Color Matching or Hard Proofs add a day to the production turn time.
We cannot color match textures or gradients.

Price will be per color / material
Please call us for more details.

Free samples are printed on small colored swatches. Check mark the specific material you’d like or click on all if you’d like them all! Then, add to cart and we’ll mail them right out to you!

Enter the square foot quantity (in whole numbers) of how much PVC material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 20 mil
Printing Process: UV Cured
Finish: Slight sheen
Maximum Media Width: 60″W
Recommended for: Big Wave Pop Ups
Other: Alternative to Laminate, for brighter colors.

Finishing:

• Hook & Loop
• Magnetic Strip on back (for an additional cost)
• Top and bottom hanging hardware (for an additional cost)

PVC (print and ship) available from California warehouse only.

Enter the square foot quantity (in whole numbers) of how much UV Tent material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 7 oz
Printing Process: UV Cured
Finish: Matte
Maximum Media Width: 98″W
Recommended for: UV Custom Casita Canopy Tents
Other:

• Water Resistance
• Vivid Color
• High Quality Finish
• Knit

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Blockout Liner (for between double-sided Casita backwall and sidewall graphics)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Enter the square foot quantity (in whole numbers) of how much Backlit material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features
Thickness: 7 oz
Printing Process: UV Cured
Finish: Semi-gloss (when unlit), vibrant (when lit)
Maximum Media Width: 98″
Recommended for: 

• Fabric Light Box
• Whistler Fabric Light Box
• Mammoth Backlit Modular Displays

Great for Light Box Displays.

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Enter the square foot quantity (in whole numbers) of how much Deco material your graphic print will need.

Use the drop-down menus to add custom finishing. Enter the quantity as either linear feet or square feet, as labeled.

Features

Weight: 9 oz./Sq.Yd.

Printing Process: Dye Sublimation, Direct-to-Fabric

Finish: Soft, matte

Maximum Media Width: 98″

Recommended for: Resort Extrusion Frames

Finishing:

• Hemming
• Rubber Edge beading
• Silicone Edge beading

Standard Finishing*:

• Hem Only (Specify in graphic upload notes)
• Pole Pocket (4.5″ Pole Pocket)
• Cut to Size (Cut Only)

Upgrade Finishing:

• Hook (Specify in graphic upload notes)
• Loop (Specify in graphic upload notes)
• Hook & Look (Specify in graphic upload notes)
• Grommets (Placed every 2 feet apart and on all corners)

*Selecting a Standard Finishing is included in the price. Any changes to the standard finishing is considered customization and can be charged extra with a longer production turnaround.

Ratings & Reviews

Be the first to write a review

• RETRACTABLES
• FABRIC DISPLAYS
• TABLE THROWS
• POP UPS
• CANOPY TENTS
• FLAGS
• RESOURCE CENTER
• TEMPLATES

Non-graphic* orders that are in stock and placed online by 3:00 p.m. PT will ship the same day from CA warehouse or by 12:00 p.m. (noon) PT will ship the same day from PA warehouse. *Except large quantities, Mammoths (all sizes) and Aspens (15 ft. & 20 ft.) to allow time for complete build and inspection.
Pick up is available between 10:00 a.m. to 4:30 p.m.

​

Fill a 10’ x 10’ trade show booth with a click of a button. Designed for your ease, here is your EZ turnkey solution in Black.

10ft. EZ Tube Black Showcase Kit Includes:

• 10ft. EZ Tube Curved Single-Sided Graphic Package
• EZ Fabric Counter with Fabric Graphic
• Black Jotter Tablet Display A

10ft. EZ Tube Curved Single-Sided Graphic Package Includes:

• (1) Custom Fabric Graphic Print with BLACK Fabric for Backside
• (1) 10ft EZ Tube Curved Frame (120”W x 89”H x 22”D)
• (1) Travel Bag with Wheels

EZ Fabric Counter with Fabric Graphic Includes:

• (1) Custom Fabric Graphic Print
• (1) EZ Fabric Counter Frame (38.5”W x 38.06”H x 14.57”D)
• (1) Frosted Acrylic Counter Top
• (1) Carry Case

Jotter Tablet Display A Includes:

• (1) Base (12.5″ Front Width x 16.5″D x 11.5″ Back Width)
• (1) Pole
• (1) Tablet Head (display size: 6”W x 8”H)
• (1) Set of Keys

More information

The fabric graphic for the 10ft. EZ Tube Curved is made like a pillowcase that fully encloses with an industrial size zipper. The 10ft. EZ Tube frame is composed of aluminum tubing and connects together with push button snaps. The full color fabric graphic is printed using the dye sublimation process. All parts fit inside the Travel Bag with Wheels.

The EZ Fabric Counter is also made of aluminum tubing, connecting together with push button snaps. Fabric graphic is also a full color dye sublimated print. Slip the fabric over the frame, hook and loop the fabric piece underneath and zip shut the backside. Attach counter top. See your printed graphic through the frosted acrylic countertop piece!

The Jotter display has a pivotal head, allowing you to rotate the tablet 360˚ and adjust the angle 135˚. Simply, insert the tablet and use the key to lock the case. The tablet is snug, secure and ready to use. The case allows for a working front and back camera as well. Compatible with 2nd, 3rd and 4th generation iPad tablets.

*Monthly specials and discounts do not apply to our showcase kits*

Fill a 10 ft x 10 ft trade show booth with a click of a button. Here’s your perfect turnkey solution, designed for your ease.

10ft Pop Up Showcase Kit Includes:

• 10ft Big Wave PVC Pop Up Package

• 36″ Silverstep with 80″ Vinyl Graphic

• Double EZ Frost Literature Stand

10ft Big Wave PVC Pop Up Package Includes:

• (1) 10ft Big Wave Pop Up Frame (10’w x 7.4’h x 3.5’d)

• (6) Custom PVC Graphic Panels

• (1) Hard Case Podium with Handle and Wheels

• (1) Custom PVC Graphic Wrap for Podium

• (2) 150 Watt Halogen Lights

36″ Silverstep with 80″ Vinyl Graphic Includes:

• (1) Custom Vinyl Single-Sided Graphic

• (1) Retractable Base with End Caps

• (1) Telescopic Support Pole

• (1) Top Clamp Bar with End Caps

• (1) Silverstep Travel Bag with Strap (40.5”w x 12”h x 4”d)

Double EZ Frost Literature Stand Includes:

• (1) Literature Stand (16.5”w x 50.5”h or 59”; shelf display area: 16.5″w x 12″h)

• (1) Hard Carry Case with Handle (21″w x 17.5″h x 6.75″d)

More information

The PVC panels for the 10ft. Big Wave Pop Up come with pre-installed hanging hardware and magnetic strips on the backside. The PVC graphic wrap for the Podium comes with pre-installed Velcro. PVC material is UV printed and cured. The 10ft. Big Wave frame is aluminum, collapsible and comes with channels bars. Big Wave frame, PVC graphics and lights all fit inside the Podium case! Find your lights conveniently stored in the lid of the podium.

The Silverstep graphic comes pre-installed for super quick setup. Vinyl banner is also UV printed and cured.

The Double EZ Frost Literature Stand comes with two adjustable height options. Pull up to increase height and latch at the bottom to secure.

*Monthly specials and discounts do not apply to our showcase kits*