VAIL 60D 4 ft. x 7 ft. Frame Only

B6

Vail-60D 4’ x 7’ Frame Only. The VAIL-60D is a double-sided extrusion with a profile width of 60mm. This extrusion has a solid outside finish. VAIL-60D is best for standing independently since the profile width is just wide enough to provide ultimate stability. This extrusion works great overhead too because the thick profile width really stands out. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit). 


Frame Includes:

  • (1) 4-Sided Frame
  • (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Hardware Setup: Take two VAIL-60D extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.


Warranty: Lifetime on frame


Frame Size: 48"W x 84"H x 2.36"D


Shipping Dimensions: (1) box 96"L x 7.25"W x 6.5"H

VAIL 60D 4 ft. x 7 ft. – Single-Sided Graphic Only

V5

Single-Sided Graphic Replacement for the Vail-60D 4’ x 7’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.


Graphic Only Includes:

  • (1) Custom Single-Sided Graphic with SEG hem

Material: Deco Fabric (non-stretch)


Print Process: Full Color Dye Sublimation 


Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. 


Warranty: One (1) year on graphics 


Artwork Size: 50"W x 86"H 


Shipping Dimensions: (1) box 16"L x 12"W x 6"H


Shipping Weight: 3 lbs

VAIL 120D 8 ft. x 8 ft. Frame Only

V4

Vail-120D 8’ x 8’ Frame Only. The VAIL-120D is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit). 


Frame Includes:

  • (1) 4-Sided Frame
  • (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench



Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Hardware Setup: Take two VAIL-120D extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.


Warranty: Lifetime on frame 


Frame Size: 96"W x 96"H x 4.72"D 


Shipping Dimensions: (1) box 96"L x 7.25"W x 6.5"H

VAIL 120D 8 ft. x 8 ft. Double-Sided Graphic Package

V3

Vail-120D 8’ x 8’ Double-Sided Graphic Package. Vail-120D is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120D is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit). 


Package Includes:

  • (1) 4-Sided Frame
  • (2) Custom Single-Sided Graphics (SEG hem)
  • (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Material: Deco Fabric (non-stretch) 


Print Process: Full Color Dye Sublimation 


Hardware Setup: Take two VAIL-120D extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side. 


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 


Warranty: Lifetime on frame; one (1) year on graphics


Frame Size: 96"W x 96"H x 4.72"D


Artwork Size: 98"W x 98"H 


Shipping Dimensions: (1) box 96"L x 7.25"W x 6.5"H

VAIL 60D 8 ft. x 8 ft. Double-Sided Graphic Package

V2

VAIL-60D 8’ x 8’ Double-Sided Graphic Package. The VAIL-60D is a double-sided extrusion with a profile width of 60mm. This extrusion has a solid outside finish. VAIL-60D is best for standing independently since the profile width is just wide enough to provide ultimate stability. This extrusion works great overhead too because the thick profile width really stands out. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is not compatible with lights (cannot be backlit).


Package Includes:

  • (1) 4-Sided Frame
  • (2) Custom Single-Sided Graphics (SEG hem)
  • (4) VAIL Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.


Material: Deco Fabric (non-stretch)


Print Process: Full Color Dye Sublimation 


Hardware Setup: Take two VAIL-60D extrusions and slide in Corner Connector; tighten. Repeat this three times.


Upgrade to Replace: VAIL Toolless Corner Connector.


Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side. 


Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet. 


Warranty: Lifetime on frame; one (1) year on graphics


Frame Size: 96"W x 96"H x 2.36"D 


Artwork Size: 98"W x 98"H 


Shipping Dimensions: (1) box 96"L x 7.25"W x 6.5"H

Vails

Pop Up Display 6ft/8ft. Tabletop Blue – 1 Fabric End Panel

PD24

Replacement panels for 8ft and 6ft Tabletop Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.

Please specify center or end cap panel when ordering as well as fabric color.
Qty 1= 1 fabric panel.

Ex.
8ft Tabletop Pop Up display requires qty 3 center panels/qty 2 end cap panels.
6ft Tabletop Pop Up display requires qty 2 center panels/qty 2 end cap panels

Pop Up Display 6ft/8ft. Tabletop Silver – 1 Fabric End Panel

PD23

Replacement panels for 8ft and 6ft Tabletop Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.

Please specify center or end cap panel when ordering as well as fabric color.
Qty 1= 1 fabric panel.

Ex.
8ft Tabletop Pop Up display requires qty 3 center panels/qty 2 end cap panels.
6ft Tabletop Pop Up display requires qty 2 center panels/qty 2 end cap panels

Pop Up Display Podium – Fabric Graphic Only

PD22

This is Fabric Print wrap for Hard Case.


Case:
Molded plastic hard carry case with inset wheels for easy mobility. Case also has a center grip.

Case Outside Dimensions: 39""H x 27.5W x 15.75""D

Case Inside Dimensions: 31.75""H x 25W x 14.25""D

Weight: 31 lbs

Pop Up Display Tabletop 8 ft. – Fabric Panel Only – Black

PD20

Product Features:
Display Height: 5′
Display Width: 8′

Includes: 

  • (3) Graphic Center Panels (Laminated Display Film)
  • (2) Graphic End Panels (Laminated Display Film)

Graphics Turnaround Time:
2 business days after proofs are approved.
Please call for production schedule if you need it sooner. Rush charges apply.

Warranty:
Frame – Lifetime warranty

Fabric Panel for 8ft/10 ft. Wave Pop Up Display – Front – Blue – 1 End Panel

PD19

Replacement panels for 8ft/10ft Big Wave Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.
Please specify center or end cap panel when ordering as well as fabric color.

8ft Wave Pop Up display
Complete set: Qty 3 center panels + Qty 2 end cap panels

10ft Wave Pop Up display
Complete Set: Qty 4 center panels+Qty 2 end cap panels

Channel Bars for backside
if ordering panels for backside, you need the following qty of channel bars.
9' Straight  - 6 Horizontal Bars + 6 Vertical Bars
10' Wave - Need 9 Bars
8' Wave - Need 6 Bars

Pop Up Display 6ft/8ft. Tabletop Black – 1 Fabric End Panel

PD18

Replacement panels for 8ft and 6ft Tabletop Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.

Please specify center or end cap panel when ordering as well as fabric color.
Qty 1= 1 fabric panel.

Ex.
8ft Tabletop Pop Up display requires qty 3 center panels/qty 2 end cap panels.
6ft Tabletop Pop Up display requires qty 2 center panels/qty 2 end cap panels

Fabric Panel for 8ft/10 ft. Wave Pop Up Display – Front – Grey – 1 End Panel

PD17

Replacement panels for 8ft/10ft Big Wave Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.
Please specify center or end cap panel when ordering as well as fabric color.

8ft Wave Pop Up display
Complete set: Qty 3 center panels + Qty 2 end cap panels

10ft Wave Pop Up display
Complete Set: Qty 4 center panels+Qty 2 end cap panels

Channel Bars for backside
if ordering panels for backside, you need the following qty of channel bars.
9' Straight  - 6 Horizontal Bars + 6 Vertical Bars
10' Wave - Need 9 Bars
8' Wave - Need 6 Bars

1 Center Fabric Panel for 8ft/10ft Wave Pop Up Display – Front side – Grey

PD16

This is a Fabric Center Panel Replacement in Grey for the for 8ft/10ft Big Wave Pop Up Displays. This is quantity 1 Center Panel, is Velcro receptive and comes complete with hanging hardware installed.

8ft Wave Pop Up display
Complete set: Qty 3 center panels + Qty 2 end cap panels

10ft Wave Pop Up display
Complete Set: Qty 4 center panels+Qty 2 end cap panels

Channel Bars for backside
if ordering panels for backside, you need the following qty of channel bars.
9' Straight  - 6 Horizontal Bars + 6 Vertical Bars
10' Wave - Need 9 Bars
8' Wave - Need 6 Bars

1 Center Fabric Panel for 8ft/10ft Wave Pop Up Display – Front side – Blue

PD15

This is a Fabric Center Panel Replacement in Blue for the for 8ft/10ft Big Wave Pop Up Displays. This is quantity 1 Center Panel, is Velcro receptive and comes complete with hanging hardware installed.

8ft Wave Pop Up display
Complete set: Qty 3 center panels + Qty 2 end cap panels

10ft Wave Pop Up display
Complete Set: Qty 4 center panels+Qty 2 end cap panels



Channel Bars for backside
if ordering panels for backside, you need the following qty of channel bars.
9' Straight  - 6 Horizontal Bars + 6 Vertical Bars
10' Wave - Need 9 Bars
8' Wave - Need 6 Bars

Pop Up Display Graphic Backside (Convex) Panel Panel Print for 10ft/20ft.

PD13

Product Overview:
* 1 Single full color graphic convex panel for  Pop Up Display.
*Note: Convex panel will only fit 10ft Backside or 20ft Serpentine Pop Up Display Convex area.
* Price is per panel and includes hanging hardware.
* Price listed is for center graphic panel OR endcap panel

Channel Bar
* 15 Chanel Bars are required to make 1 complete back side of 20′ Display Double-Sided

10ft Pop Up Display Convex (Backside) Panel

20ft Serpentine Pop Up Display Convex Panel

Pop Up Display Graphic End Panel PVC (per Panel)

PD11

Product Overview:

 

  • 1 single full color graphic print for Big Wave Pop Up Displays

 

*Note-These panels will only fit our Big Wave Pop Up Displays.

 

  • Price is per panel and includes hanging hardware.

  • Price listed is for center graphic panel OR endcap panel.

  • Graphic Turnaround TIme: 2 business days after approval

Hanging Hardware for Pop Up Tabletop

PD12

Qty1 = 1 set of hanging hardware (1 top and 1 bottom piece)

6 ft. Tabletop Pop Up requires: x 2 center panels and x 2 end panels

8 ft. Tabletop Pop Up requires: x 3 center panels and x 2 end panels

 

Fabric Panel for 8ft/10 ft. Wave Pop Up Display – Front – Black – 1 End Panel

PD8

Replacement panels for 8ft/10ft Big Wave Pop Up Displays. Panels are Velcro receptive and come complete with hanging hardware installed.
Please specify center or end cap panel when ordering as well as fabric color.

8ft Wave Pop Up display
Complete set: Qty 3 center panels + Qty 2 end cap panels

10ft Wave Pop Up display
Complete Set: Qty 4 center panels+Qty 2 end cap panels

Channel Bars for backside
if ordering panels for backside, you need the following qty of channel bars.
9′ Straight  – 6 Horizontal Bars + 6 Vertical Bars
10′ Wave – Need 9 Bars
8′ Wave – Need 6 Bars

Pop Up Display Graphic Center Panel PVC (per Panel)

PD7

Product Overview:

  • 1 single full color graphic print for Big Wave Pop Up Displays

*Note-These panels will only fit our Big Wave Pop Up Displays.

  • Price is per panel and includes hanging hardware.
  • Price listed is for center graphic panel OR endcap panel.
  • Graphic Turnaround TIme: 2 business days after approval

Pop Up Display 10ft Graphic End Panel Laminated (per Panel)

PD6

Product Overview:

 

  • 1 single full color graphic print for Big Wave Pop Up Displays

 

*Note-These panels will only fit our Big Wave Pop Up Displays.

 

  • Price is per panel and includes hanging hardware.

  • Price listed is for center graphic panel OR endcap panel.

  • Graphic Turnaround TIme: 2 business days after approval

Pop Up Display Graphic Center Panel Laminated

PD2

Product Overview:

 

  • 1 single full color graphic print for Big Wave Pop Up Displays

 

*Note-These panels will only fit our Big Wave Pop Up Displays.

 

  • Price is per panel and includes hanging hardware.

  • Price listed is for center graphic panel OR endcap panel.

  • Graphic Turnaround Time: 2 business days after approval

 

2 ft. Aspen T-Leg – 6’h (Frame Only)

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft.

Add mobility to the Aspen T-Leg with Casters. 

Add Lights to spotlight artwork.

Size: 2’w x 6’h

2 ft. Hardware Package Includes:

  • (2) T-Leg side feet (stationary)

  • (1) Black Aluminum Aspen Extrusion

  • (4) Corner Connectors

  • (1) Allen Wrench

Warranty:

  • 1 year on frame

2 ft. Aspen T-Leg – 7’h (Frame Only)

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 2’w x 7’h

2 ft. Hardware Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench

Warranty:

  • 1 year on frame

2 ft. Aspen T-Leg – 8’h (Frame Only)

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft.

Add mobility to the Aspen T-Leg with Casters. 

Add Lights to spotlight artwork.

Size: 2’w x 8’h

3 ft. Hardware Package Includes:

  • (2) T-Leg side feet (stationary)

  • (1) Black Aluminum Aspen Extrusion

  • (4) Corner Connectors

  • (1) Allen Wrench

Warranty:

  • 1 year on frame

3 ft. Aspen T-Leg – 6’h (Frame Only)

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 3’w x 6’h

3 ft. Hardware Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench

Warranty:

  • 1 year on frame

3 ft. Aspen T-Leg – 7’h (Frame Only)

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft.

Add mobility to the Aspen T-Leg with Casters. 

Add Lights to spotlight artwork.

Size: 3’w x 7’h

3 ft. Hardware Package Includes:

  • (2) T-Leg side feet (stationary)

  • (1) Black Aluminum Aspen Extrusion

  • (4) Corner Connectors

  • (1) Allen Wrench

Warranty:

  • 1 year on frame

3 ft. Aspen T-Leg – 8’h (Frame Only)

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft.

Add mobility to the Aspen T-Leg Frame with Casters. 

Add Lights to spotlight artwork.

Size: 3’w x 8’h

3 ft. Hardware Package Includes:

  • (2) T-Leg side feet (stationary)

  • (1) Black Aluminum Aspen Extrusion

  • (4) Corner Connectors

  • (1) Allen Wrench

Warranty:

  • 1 year on frame

2 ft. Aspen T-Leg – 6’h (Graphic Only)

AT12

Get new artwork for the front and backside of a 2’w x 6’h Aspen T-Leg! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

2 ft. Aspen T-Leg – 7’h (Graphic Only)

AT11Get new artwork for the front and backside of a 2’w x 7’h Aspen T-Leg! SEG frames make replacing graphics very easy.

 

This selection includes:

 

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

2 ft. Aspen T-Leg – 8’h (Graphic Only)

AT10

Get new artwork for the front and backside of a 2’w x 8’h Aspen T-Leg! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

Ratings & Reviews

3 ft. Aspen T-Leg – 6’h (Graphic Only)

AT9

Get new artwork for the front and backside of a 3’w x 6’h Aspen T-Leg! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

3 ft. Aspen T-Leg – 7’h (Graphic Only)

AT8

Get new artwork for the front and backside of a 3’w x 7’h Aspen T-Leg! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

3 ft. Aspen T-Leg – 8’h (Graphic Only)

AT7

Get new artwork for the front and backside of a 3’w x 8’h Aspen T-Leg! SEG frames make replacing graphics very easy.

 

This selection includes:

 

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

Elevate your display setup with the 3 ft. Aspen K – 8’h (Graphic Only). This premium T-leg is designed to provide unmatched stability and elegance for your graphic displays. Crafted with high-quality materials, its sleek design seamlessly integrates into any environment, making it perfect for trade shows, corporate events, and retail spaces. The minimalist aesthetic ensures that your graphics take center stage, attracting the attention they deserve while maintaining a professional look.

2 ft. Aspen T-Leg – 6’h Fabric SEG Double-Sided Graphic Package

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft. Graphic packages come with double-sided full-color dye sublimation fabric prints.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 2’w x 6’h

2 ft. Graphic Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench
  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on frame
  • 1 year on graphic

2 ft. Aspen T-Leg – 7’h Fabric SEG Double-Sided Graphic Package

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft. Graphic packages come with double-sided full-color dye sublimation fabric prints.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 2’w x 7’h

2 ft. Graphic Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench
  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on frame
  • 1 year on graphic

3 ft. Aspen T-Leg – 7’h Fabric SEG Double-Sided Graphic Package

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft. Graphic packages come with double-sided full-color dye sublimation fabric prints.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 3’w x 7’h

3 ft. Graphic Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench
  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on frame
  • 1 year on graphic

2 ft. Aspen T-Leg – 8’h Fabric SEG Double-Sided Graphic Package

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft. Graphic packages come with double-sided full-color dye sublimation fabric prints.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 2’w x 8’h

2 ft. Graphic Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench
  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on frame
  • 1 year on graphic

3 ft. Aspen T-Leg – 6’h Fabric SEG Double-Sided Graphic Package

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft. Graphic packages come with double-sided full-color dye sublimation fabric prints.

Add mobility to the Aspen T-Leg with Casters.

Add Lights to spotlight artwork.

Size: 3’w x 6’h

3 ft. Graphic Package Includes:

  • (2) T-Leg side feet (stationary)
  • (1) Black Aluminum Aspen Extrusion
  • (4) Corner Connectors
  • (1) Allen Wrench
  • (2) Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on frame
  • 1 year on graphic

3 ft. Aspen T-Leg – 8’h Fabric SEG Double-Sided Graphic Package

Use stationary T-Leg side feet for Aspen Onyx rich, deep black frames instead of the flat black steel base. Fit for fabric Silicone Edge Graphics (SEG), Aspen T-Leg will add flair and contrast to your finished design! Aspen T-Leg, a frame that stands freely like a retractable banner stand, is available in 2 ft. and 3 ft. widths by heights of 6ft., 7ft. or 8ft. Graphic packages come with double-sided full-color dye sublimation fabric prints.

3 ft. Aspen T-Leg fabric graphic package. The double-sided graphic package provides twice the exposure, making it ideal for spaces where visibility from all directions is crucial.

Add mobility to the Aspen T-Leg with Casters. 

Add Lights to spotlight artwork.

 

Size: 3’w x 8’h

 

3 ft. Graphic Package Includes:

 

  • (2) T-Leg side feet (stationary)

  • (1) Black Aluminum Aspen Extrusion

  • (4) Corner Connectors

  • (1) Allen Wrench

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

ASPEN T-Leg

6 ft. Big Sky Counter – 40″h (Hardware Only)


Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

Display Size: 72″L x 40″H x 24”D

6 ft. Hardware Package Includes:

  • (8) Vertical Extrusion pieces and connectors
  • (16) Horizontal Extrusion pieces and connectors
  • (3) Acrylic Countertops
  • (1) Torx Key

Warranty:

  • Lifetime on Frame

Color Available : Silver , Black

6 ft. Big Sky Counter – 40″h – 6 ft. Side (Graphic Only)

This is one (1) replacement graphic for the 6 ft. side* of the 6 ft. Big Sky Counter. Order quantity 2 if replacing both front and back sides of a 6 ft. wide frame. 

*If replacing the 2 ft. outside ends as well, order 2 ft. graphic only(s) separately.

Includes:

  • (1) SEG Fabric Graphic for 6 ft. side

How to install SEG graphic:

Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.  

3 ft. Big Sky Tower – 8’h (Hardware Only)

Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.

Display Size: 3’L x 8’H x 3’D

3 ft. Hardware Package Includes:

  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Torx Key

Warranty: Lifetime on Frame

Shipping Weight: 26 lbs

Shipping Dims: 7″L x 7″W x 10″H

5 ft. Big Sky Tower – 8’h (Graphic Only)

This is four (4) replacement graphics for the 5 ft. Big Sky Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 4 graphic replacements, please order Deco Fabric per sq. ft. using the “Printing” tab.

Includes:

  • (4) SEG Fabric Graphics 5’w x 8’h

Graphic Size: 60.5”w x 98”h (including 1” bleed around perimeter)

How to install SEG graphic:

Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

5 ft. Big Sky Tower – 8’h (Hardware Only)

Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.

Display Size: 5’L x 8’H x 5’D

5 ft. Hardware Package Includes:

  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Torx Key

Warranty: Lifetime on Frame

Shipping Weight: 40 lbs
Shipping Dims: 97″L x 7″W x 10″H

3 ft. Big Sky Tower – 8’h (Graphic Only)

This is four (4) replacement graphics for the 3 ft. Big Sky Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 4 graphic replacements, please order Deco Fabric per sq. ft. using the "Printing" tab.

Includes Big Sky Tower:

  • (4) SEG Fabric Graphics 3'w x 8'h
  • Graphic Size: 36.5”w x 98”h (including 1” bleed around perimeter)

How to install SEG graphic:

Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

5 ft. Big Sky Tower – 8’h Graphic Package

Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.

Display Size: 5’L x 8’H x 5’D

5 ft. Graphic Package Includes:

  • (4) SEG Fabric Graphics 5’w x 8’h
  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Torx Key

Warranty: 

  • Lifetime on Frame
  • One (1) year on graphics

Graphic Size: 60.5″w x 98″h
Shipping Weight: 40 lbs
Shipping Dims: 97″L x 7″W x 10″H

4 ft. Big Sky Tower – 8’h (Hardware Only)

Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.

Display Size: 4’L x 8’H x 4’D

4 ft. Hardware Package Includes:

  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Torx Key

Warranty: Lifetime on Frame

Shipping Weight: 32 lbs
Shipping Dims: 97″L x 7″W x 10″H

 

4 ft. Big Sky Tower – 8’h (Graphic Only)

This is four (4) replacement graphics for the 4 ft. Big Sky Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 4 graphic replacements, please order Deco Fabric per sq. ft. using the "Printing" tab.

Includes:

  • (4) SEG Fabric Graphics 4'w x 8'h

Graphic Size: 48.5”w x 98”h (including 1” bleed around perimeter)

How to install SEG graphic:

Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.  

 

4 ft. Big Sky Tower – 8’h Graphic Package

Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.

Display Size: 4'L x 8'H x 4'D

4 ft. Graphic Package Includes:

  • (4) SEG Fabric Graphics 4'w x 8'h
  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Torx Key

Warranty: 

  • Lifetime on Frame
  • One (1) year on graphics

Graphic Size: 48.5"w x 98"h
Shipping Weight: 32 lbs
Shipping Dims: 97"L x 7"W x 10"H

4 ft. Big Sky Counter – 40″h – 4 ft. Side (Graphic Only)


This is one (1) replacement graphic for the 4 ft. side* of the 4 ft. Big Sky Counter. Order quantity 2 if replacing both front and back sides of a 4 ft. wide frame.

*If replacing the 2 ft. outside ends as well, order 2 ft. graphic only(s) separately.

Includes:

  • (1) SEG Fabric Graphic for 4 ft. side

How to install SEG graphic:

Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

 

2 ft. Big Sky Counter – 40″h (Hardware Only)


Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

Display Size: 24”L x 40″H x 24″D

2 ft. Hardware Package Includes:

  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Acrylic Countertop
  • (1) Torx Key

Warranty:

  • Lifetime on Frame

Color Available : Silver , Black

4 ft. Big Sky Counter – 40″h (Hardware Only)


Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

Display Size: 48”L x 40”H x 24″D

4 ft. Hardware Package Includes:

  • (6) Vertical Extrusion pieces with connectors
  • (12) Horizontal Extrusion pieces with connectors
  • (2) Acrylic Countertops
  • (1) Torx Key

Warranty:

  • Lifetime on Frame

Color Available : Silver , Black

2 ft. Big Sky Counter – 40″h – 2 ft. Side (Graphic Only)

 

 

This is one (1) replacement graphic for the 2 ft. side of a Big Sky Counter. All Big Sky Counter outside ends* are 2 ft. wide. Order quantity 2+ if replacing more than one 2 ft. side.

*Front and Back graphics are either 2 ft., 4 ft. or 6 ft. wide, depending on the frame size.

Includes:

  • (1) SEG Fabric Graphic for 2 ft. side

How to install SEG graphic:

Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.  

3 ft. Big Sky Tower – 8’h Graphic Package

Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.

Display Size: 3'L x 8'H x 3'D

3 ft. Graphic Package Includes:

  • (4) SEG Fabric Graphics 3'w x 8'h
  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Torx Key

Warranty:

  • Lifetime on Frame
  • One (1) year on graphics

Graphic Size: 36.5"w x 98"h
Shipping Weight: 26 lbs
Shipping Dims: 97"L x 7"W x 10"H

2 ft. Big Sky Counter – 40″h Graphic Package

 

 

Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

2 ft. Graphic Package Includes:

  • (4) SEG Fabric Graphics for 2 ft. sides
  • (4) Vertical Extrusion pieces with connectors
  • (8) Horizontal Extrusion pieces with connectors
  • (1) Acrylic Countertop
  • (1) Torx Key

Warranty:

  • Lifetime on Frame
  • 1 year on Graphics

Display Size: 24”L x 40”H x 24″D
Template Size: 26”w x 42”h (including 1” bleed around perimeter)

Color Available : Silver , Black

4 ft. Big Sky Counter – 40″h Graphic Package

Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

4 ft. Graphic Package Includes:

  • (2) SEG Fabric Graphics for 4 ft. sides
  • (2) SEG Fabric Graphics for 2 ft. sides
  • (6) Vertical Extrusion pieces with connectors
  • (12) Horizontal Extrusion pieces with connectors
  • (2) Acrylic Countertops
  • (1) Torx Key

Warranty:

  • Lifetime on Frame
  • 1 year on Graphics

Display Size: 48”L x 40”H x 24"D
Template Sizes:

  • 26”w x 42”h
  • 50”w x 42”h (including 1” bleed around perimeter)

Color Available : Silver , Black

6 ft. Big Sky Counter – 40″h Graphic Package

Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.

Display Size: 72"L x 40"H x 24”D

6 ft. Graphic Package Includes:

  • (2) SEG Fabric Graphics for 2 ft. sides
  • (2) SEG Fabric Graphics for 6 ft. sides
  • (8) Vertical Extrusion pieces and connectors
  • (16) Horizontal Extrusion pieces and connectors
  • (3) Acrylic Countertops
  • (1) Torx Key

Warranty:

  • Lifetime on Frame
  • 1 year on Graphics


Template Sizes:

  • 26”w x 42”h
  • 72”w x 42”h (including 1” bleed around perimeter)

Color Available : Silver , Black

Big Sky

2 ft. Aspen Onyx – 6’h (Graphic Only)

Get new graphic artwork for the front and backside of a 2’w x 6’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 2’w x 6’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

2 ft. Aspen Onyx – 7’h (Graphic Only)

Get new graphic artwork for the front and backside of a 2’w x 7’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 2’w x 7’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

3 ft. Aspen Onyx – 8’h (Graphic Only)

Get new graphic artwork for the front and backside of a 3’w x 8’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 3’w x 8’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

2 ft. Aspen Onyx – 8’h (Graphic Only)

Get new graphic artwork for the front and backside of a 2’w x 8’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 2’w x 8’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

4 ft. Aspen Onyx – 7’h (Graphic Only)

Get new graphic artwork for the front and backside of a 4’w x 7’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 4’w x 7’h Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

4 ft. Aspen Onyx – 8’h (Graphic Only)

Get new graphic artwork for the front and backside of a 4’w x 8’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 4’w x 8’h Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

5 ft. Aspen Onyx – 6’h (Graphic Only)

Get new graphic artwork for the front and backside of a 5’w x 6’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 5’w x 6’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

5 ft. Aspen Onyx – 7’h (Graphic Only)

Get new graphic artwork for the front and backside of a 5’w x 7’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 5’w x 7’h Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

5 ft. Aspen Onyx – 8’h (Graphic Only)

Get new graphic artwork for the front and backside of a 5’w x 8’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 5’w x 8’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

2 ft. Aspen Onyx – 7’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 2’w x 7’h

 

Hardware Package Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

4 ft. Aspen Onyx – 7’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 4’w x 8’h

 

Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

 

5 ft. Aspen Onyx – 6’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 5’w x 6’h

 

Includes:

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

 

5 ft. Aspen Onyx – 7’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 5’w x 7’h

 

Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

5 ft. Aspen Onyx – 8’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 5’w x 8’h

 

Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

5 ft. Aspen Onyx – 6’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 5’w x 6’h

 

Includes:

 

  • Steel Base with Bolts

  • Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

 

2 ft. Aspen Onyx – 8’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 2’w x 8’h

 

Hardware Package Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

4 ft. Aspen Onyx – 8’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 4’w x 8’h

 

Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

4ft. Aspen Onyx – 8’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 7’h

 

Includes:

 

  • Steel Base with Bolts

  • Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

5 ft. Aspen Onyx – 7’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 5’w x 7’h

 

Includes:

 

  • Steel Base with Bolts

  • Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

4 ft. Aspen Onyx – 6’h (Graphic Only)

Get new graphic artwork for the front and backside of a 4’w x 6’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 4’w x 6’h Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on graphics

3 ft. Aspen Onyx – 6’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 6’h

 

Hardware Package Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

3 ft. Aspen Onyx – 8’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 8’h

 

Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphic with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

3 ft. Aspen Onyx – 8’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 8’h

 

Hardware Package Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame

 

4 ft. Aspen Onyx – 6’h (Frame Only)

Product Overview:
Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

Size: 4’w x 6’h

Includes:

  • Black Steel Base with Bolts
  • Black Aluminum Extrusion Frame
  • Corner Connectors
  • Allen Wrench

Warranty:

  • 1 year on frame

4ft. Aspen Onyx – 6’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 7’h

 

Includes:

 

  • Steel Base with Bolts

  • Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

3 ft. Aspen Onyx – 6’h (Graphic Only)

Get new graphic artwork for the front and backside of a 3’w x 6’h Aspen Onyx! SEG frames make replacing graphics very easy.

This selection includes:

  • (2) 3’w x 6’h Single-Sided Fabric Graphics with Silicone-Edge

Warranty:

  • 1 year on graphics

2 ft. Aspen Onyx – 8’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 7’h

 

Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • Double-Sided Graphic

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

5 ft. Aspen Onyx – 8’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 5’w x 8’h

Includes:

 

  • Steel Base with Bolts

  • Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphic with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

2 ft. Aspen Onyx – 6’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 2’w x 6’h

 

Graphic Package Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • (2) Single-Sided Fabric Graphics with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

4ft. Aspen Onyx – 7’h Fabric SEG Double-Sided Graphic Package

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 3’w x 7’h

 

Includes:

 

  • Steel Base with Bolts

  • Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

  • 2 Single-Sided Fabric Graphic with Silicone-Edge

 

Warranty:

 

  • 1 year on frame

  • 1 year on graphic

2 ft. Aspen Onyx – 6’h (Frame Only)

Product Overview:

Our new rich, deep black Aspen frames, fit for fabric Silicone Edge Graphics (SEG), will add flair and contrast to your finished design! Aspen Onyx display comes with a rectangular steel base the same width as the frame, maximizing balance to produce a sturdy display. A wall frame that stands independently like a retractable banner stand, Aspen Onyx is available in widths of 2ft., 3ft., 4ft., or 5ft. by heights of 6ft., 7ft. or 8ft. Graphic packages come with single- or double-sided full color dye sublimation fabric prints.

 

Size: 2’w x 6’h

 

Hardware Package Includes:

 

  • Black Steel Base with Bolts

  • Black Aluminum Extrusion Frame

  • Corner Connectors

  • Allen Wrench

 

Warranty:

 

  • 1 year on frame