Latest updates, trends about printing services by NewYorkBannerStands.
Turn your display into a backlit display with these LED edge lights. This selection with fit a 10 ft. x 8 ft. Mammoth display.
Included are 12 LED light strips and 1 transformer with plug. Screw edge lights into inside of frame install.
It is highly recommended to get graphic prints on UV backlit fabric, as the ink consistency is most compatible with bright lights.
Turn your display into a backlit display with these LED edge lights. This selection with fit a 16 ft. x 8 ft. Mammoth display.
Included are 22 LED light strips and 1 transformer with plug. Screw edge lights into inside of frame to install.
It is highly recommended to get graphic prints on UV backlit fabric, as the ink consistency is most compatible with bright lights.
Spotlight your graphics like artwork in a museum!
The Classic Tahoe Silver Light is halogen, consumes 150 watts, and has a slender Silver body with power cord. Clip included to attach light to frame.
Give your graphics a beautiful white glow with this energy efficient and powerful LED light! Its wider head allows for broader range of shining light. Stylish and compact, this light comes equipped with a convenient on-off switch and a 270 degree adjustable head. AC Power adapter included.
Power cord length: 11’4”
Body Color: White
Adapter clip specifically for Tahoe Twistlock displays is also included.
Use for Tahoe Twistlock Displays: X, Y, Z & Rack.
Give your graphics a beautiful white glow with this energy efficient and powerful LED light! Its wider head allows for broader range of shining light. Stylish and compact, this light comes equipped with a convenient on-off switch and a 270 degree adjustable head. AC Power adapter included.
Power cord length: 11’4”
Body Color: White
Adapter clip comes conveniently installed on every RPL frame.
Use for:
5 ft. RPL
7.5 ft. x 5 ft. RPL
5 ft. x 7.5 ft. RPL
8 ft. RPL
10 ft. RPL
15 ft. RPL
20 ft. RPL
Specifications:
LED Light
18W
Emitting Color: White
Luminous Intensity: 2500 mcd
Power: 12Volts – 1500ma
Natural Life: 10000hours
Operation Temperature: 45�C (113F)
Cord Length: 118 Inches
Clamp opens up to 4″” wide
Give your graphics a beautiful white glow with this energy efficient and powerful LED light! Its wider head allows for broader range of shining light. Stylish and compact, this light comes equipped with a convenient on-off switch and a 270 degree adjustable head. AC Power adapter included.
Power cord length: 11’4”
Body Color: White
Adapter clip specifically for Pop Up displays is also included.
Use with:
6 ft./8 ft. Tabletop Pop Up Display
8 ft. Wave Pop Up Display
9 ft. Straight Pop Up Display
10 ft. Big Wave Pop Up Display
16 ft./20 ft. Big Wave Pop Up Display
Product Overview: Give your graphics a beautiful white glow with this energy efficient and powerful LED light! Its wider head allows for broader range of shining light. Stylish and compact, this light comes equipped with a convenient on-off switch and a 270 degree adjustable head. AC Power adapter included.
*Adapter clip specifically for Ready Pop displays is also included.
Power Cord Length: 11’4”
Body Color: White
Use For:
Ready Pop 5 ft.
Ready Pop 7.5 ft. x 5 ft.
Ready Pop 8 ft. x 8 ft. (Curved & Straight)
Ready Pop 10 ft. x 8 ft. (Curved & Straight)
Use this halogen light to add some brightness to any Panel Display!
Low voltage 35 watt “slender” spotlight which mounts to a vertical pole and is only available in an attractive brushed stainless steel finish.
Spotlight your graphics like artwork in a museum!
The Aspen Small Light consumes 50 watts, is halogen, and has a slender Silver body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.
Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup.
Spotlight your graphics like artwork in a museum!
Use this incandescent Vegas light, finished in a deep satin black, on any Pop Up or Ready Pop display! Equipped with 6.2 ft. power cord and bracket for attachment, this Vegas light consumes 50 watts.
Low voltage 50 watt spot light with stylish “goose neck” arm. Available in both Silk Black and deluxe Chrome finishes. Mounts horizontally
Use for: Jumbo Banners, Sliders, 6 ft to 10 ft. Curved EZ Tubes
Open width of clamp: 2.25″
Low voltage 50 watt spot light with stylish “goose neck” arm. Available in both Silk Black and deluxe Chrome finishes. Mounts horizontally
Use for: Jumbo Banners, Sliders, 6 ft to 10 ft. Curved EZ Tubes
Open width of clamp: 2.25″
Accessorize your RPL Fabric Pop Up display with some LED lights! It’s slender body is finished in a light silver. Comes with bracket and power cord. Can be used on all RPL sizes.
Shipping Dimensions 24.25″L x 7″W x 2.75″H
Spotlight your graphics like artwork in a museum!
The Ready Pop Silver Light consumes 150 watts, is halogen, and has a slender Silver body with a power cord.
Black Lights for the Black Silverstep Retractable Banner Stand. This halogen light consumes 50 watts, has a slender body finished in light silver and a power cord.
Light Head Diameter: 2″
Light Head Depth: 3″
Light Head Adjustable Angle: 90″
Neck: 16″
Cord: 8.6ft
The Clamp Light is halogen, consumes 35 watts, and has attached power cord. Compatible with retractable banner stands and indoor displays, the Clamp Light is only available in a brushed stainless steel finish.
Cord Length: 106″
Spotlight your graphics like artwork in a museum!
The Ready Pop Black Light consumes 150 watts, is halogen, and has a slender Black body with a power cord.
This LED Silver Clamp Light is compatible with retractable banner stands and indoor displays. It is only available in a brushed stainless steel finish.
110 voltage LED light
Dimensions:
Width: 5″
Height: 19″
Lamp Dimensions:
5.5″W x 2.5″H x 1.25″D
Clamp wide open: 1.75″
Cord Length: 118″
This Ready Pop LED Light will definitely enhance your image, shining a bright light on your message! Sold in quantities of one, this version comes in a light silver.
Product Overview:
Accessorize your RPL Fabric Pop Up display with some LED lights! It’s slender body is finished in a deep satin black. Comes with bracket and power cord. Can be used on all RPL sizes.
Shipping Dimensions:
24.25″L x 7″W x 2.75″H
This Ready Pop Fabric display LED Light will definitely enhance your image, shining a bright light on your message! Sold in quantities of one, this version comes in a deep satin black.
Silver Lights for the Silverstep Retractable, Silverwing Retractable, and L-Banner Stand. This halogen light consumes 50 watts, has a slender body finished in light silver and a power cord.
Light Head Diameter: 2″
Light Head Depth: 3″
Light Head Adjustable Angle: 90″
Neck: 16″
Cord: 8.6ft
Mount your Falcon flagpole to a wall or any other safe vertical surface with the Falcon Fixed Mount 0°. The bracket comes equipped with a welded-on ball bearing spindle, allowing your flag to rotate as desired. Heavy-duty expansion screws are tough enough for concrete surfaces.
Insert a wooden shelf for the EZ Fabric Counter! An accessory upgrade, the shelf sits midway inside the frame and is completely unseen when fabric graphic is zipped shut. Unzip graphic from the back to gain access to shelf. The EZ Fabric Counter frame includes the horizontal end bars needed to support shelf.
Includes:
(1) Shelf for Straight Frame
Jotter Tablet Stand - A Style - Back Banner Attachment (Black) with 14" w x 48" h super flat vinyl graphic
Jotter Tablet Stand - A Style - Back Banner Attachment (Black) with 14" w x 96" h super flat vinyl graphic
Mount your Falcon flagpole on top of a short wall, on the floor or any other safe horizontal surface with the Falcon Fixed Mount 90°. The bracket comes equipped with a welded-on ball bearing spindle, allowing your flag to rotate as desired. Heavy-duty expansion screws are tough enough for concrete surfaces.
Velcro receptive fabric wrap for Big Wave podium. Includes podium wrap and top lid fabric for case to counter conversion.
Differing from the standard spike base, the Falcon Triangle Spike Base is heavier with a sharper point. This spike base, shaped like a dagger, makes ground penetration easier—especially for tougher terrains.
Jotter Back Banner Attachment (Pole Only)
Mount your Falcon flagpole to a wall or any other safe vertical surface with the Falcon Fixed Mount 30°. The bracket comes equipped with a welded-on ball bearing spindle, allowing your flag to rotate as desired. Heavy-duty expansion screws are tough enough for concrete surfaces.
Insert a wooden shelf for the EZ Fabric Counter! An accessory upgrade, the shelf sits midway inside the frame and is completely unseen when fabric graphic is zipped shut. Unzip graphic from the back to gain access to shelf. The EZ Fabric Counter frame includes the horizontal end bars needed to support shelf.
Compatible with the Jotter Tablet Stand A (Black or White), this optional brochure holder is a great accessory that allows you to display tri-fold pamphlets, and has a small slot to hold business cards as well. The brochure holder measures 4 3/8” W x 7”H x 1 1/2”D, and the business card holder accepts standard 3.5” x 2” business cards.
To install, snap top clip onto pole at desired height, tighten the screw, slide on brochure holder, snap bottom clip onto pole and repeat.
Includes:
(1) Acrylic Brochure Holder
(2) Screws
(2) Plastic Brackets
Warranty: 1 year
Shipping Weight: 2 lbs
Shipping Dimensions: 11 1/4”L x 8 3/4”W x 6”H
Jotter Tablet Stand sold separately. Brochure Holder will not fit Jotter in styles B or C.
Velcro receptive fabric wrap for Big Wave podium. Includes podium wrap and top lid fabric for case to counter conversion.
This is one replacement support pole for the 60″w Silverstep Retractable Banner Stand. (This size width requires 2 poles; order 2 if both poles need replacing).
Pole has 1 section. Bungee cord is cut. Twist and tighten to adjust telescopic pole for 2 graphic heights: 36″h or 59″h.
This is one replacement support pole for the 48″w Silverstep Retractable Banner Stand. (This size width requires 2 poles; order 2 if both poles need replacing).
Pole has 1 section. Bungee cord is cut. Twist and tighten to adjust telescopic pole for 2 graphic heights: 36″h or 59″h.
top fabric piece
This is one replacement support pole for the 36″w Silverstep Retractable Banner Stand.
Pole has 1 section. Bungee cord is cut. Twist and tighten to adjust telescopic pole for 2 graphic heights: 36″h or 59″h.
This is one replacement support pole for the 60″w Silverstep Retractable Banner Stand. (This size width requires 2 poles; order 2 if both poles need replacing).
Pole has 2 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 5 graphic heights: 69″h, 72″h, 80″h, 84″h or 92″h.
Hold down the Casita Canopy using this bundle of 4 Ropes and 4 Metal Stakes. Drive the stakes into semi-soft ground 8 inches or so away from each leg of the casita canopy, with the hook end of the stake facing away from the casita canopy. Loop rope under each hook end of stake and around each leg. Then tie to secure. Rope and stakes come in a nylon bag.
Shipping Dimensions:
4″L x 4″W x 12″H
Velcro receptive fabric wrap for Big Wave podium. Includes podium wrap and top lid fabric for case to counter conversion.
This is one replacement support pole for the 24″w Tabletop Silverstep Retractable Banner Stand.
Pole has 2 or 3 sections, depending on the height you need. Bungee cord is cut and reattached. Twist and tighten to adjust telescopic pole for 4 graphic heights: 45″h, 54″h, 63″h or 76″h.
This is one replacement support pole for the 48″w Silverstep Retractable Banner Stand. (This size width requires 2 poles; order 2 if both poles need replacing).
Pole has 2 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 5 graphic heights: 69″h, 72″h, 80″h, 84″h or 92″h.
Accessorize your Pop Up display with some LED lights! It’s slender body is finished with a light steel silver. Sold as qty. 1.
Spotlight your graphics like artwork in a museum!
The Pop Up Black Light consumes 150 watts and has a slender Black body with a power cord.
Optional shelf for wave pop up displays. Can be mounted straight or angled to suit your needs.
Display Size: 27.165″ width / 11.5″ depth
Weight: 6 lbs each
Selecting this product will give you the additional poles and springs that is needed when ordering a Double-Sided Outdoor Banner Wall.
Includes:
Accessorize your Pop Up display with some LED lights! It’s slender body is finished with a deep satin black. Sold as qty. 1.
The Silverstep Magnetic Connector allows you to link together two or more Silverstep stands to create a backdrop display. Remove one regular end cap from two stands, and replace with one Silverstep Magnetic Connector.
Available for all size widths, you can mix and match sizes to accommodate almost any trade show booth size. Graphic change-out is easy and enables you to have a fresh look at each event.
This black nylon sand bag cover is used to protect your sand bag as well as to easily attach your sand bag to one leg of the Casita Canopy for added weight against wind. Included is the cover and hook. Do not fill this cover with sand. To use, slip hook through the grommet located on the handle of the cover and then close hook around leg of casita canopy. With the cover already on the ground, open velcro opening and place sand bag* inside the cover. Close velcro opening, and you’re done.
Dimensions:
11″L x 11″W x 6″H
*Sand and sand bag are not included with the cover, nor do we sell sand bags or sand.
This is one replacement support pole for the 24″w Silverstep Retractable Banner Stand.
Pole has 4 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 2 graphic heights: 85″h or 92″h.
When adding a custom back wall and/or half-side wall(s), this Rail is a must-have for the 10ft Casita Canopy. To Position, first clamp snap rings around the legs of the frame. Slide Rail through the pole pocket expertly sewn on the top of the back wall and/or half-side walls. Bring Rail with fabric up to clamp snap rings, and tighten ends with knobbed screws. This add-on has a toolless assembly.
1 Rail includes:
1 Rail for 1 Backwall (bottom)
2 Rails for 1 Sidewall (top & bottom)
Shipping dimensions for 2 sets of Rails
58″ x 5.25″ x 2.5″
Shipping dimensions for 5 Rails
58″ x 6″ x 6″
This is one replacement support pole for the 36″w Silverstep Retractable Banner Stand.
Pole has 2 sections with bungee cord to guide extension. Twist and tighten to adjust telescopic pole for 5 graphic heights: 69″h, 72″h, 80″h, 84″h or 92″h.
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.
Features
Material: Aluminum
Length: 16 in.
Compatible with: Vail-100D profile width (100mm).
Casters for Aspen T-Legs (1 set includes 4 wheels)
Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.
Features
Material: Aluminum
Length: 16 in.
Compatible with:
Made like a rope ladder, these are very bright LED lights that can hang. Use for SEG backlit displays*. Unroll and hang onto included hooks located on top frame, inside. Transformer included.
*Custom sizes are available. Ask our sales department!
Give your graphics a beautiful white glow with this energy efficient and powerful LED light! Its wider head allows for broader range of shining light. Stylish and compact, this light comes equipped with a convenient on-off switch and a 270 degree adjustable head. AC Power adapter included.
Power cord length: 11’4”
Body Color: White
Adapter clip specifically for Aspen SEG Frames is also included.
Use for Aspen Fabric Frame 4 ft. or wider.
Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.
Features
Material: Aluminum
Length: 12 in.
Compatible with:
Use Vail Feet for freestanding Resort Extrusion display. Feet attach to frame using included screws. Sold per foot.
Features
Material: Aluminum
Length: 12 in.
Compatible with: Vail-60D profile width (60mm)
Spotlight your graphics like artwork in a museum!
The Aspen Small Light consumes 50 watts, is halogen, and has a slender Black body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.
Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup.
Spotlight your graphics like artwork in a museum!
The Aspen Large Light is halogen, consumes 150 watts, has a larger head and a slender Silver body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.
Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup.
Spotlight your graphics like artwork in a museum!
The Aspen Large Light is halogen, consumes 150 watts, has a larger head and a slender Black body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.
Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup.
Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Curved feet add a stylish appeal and a little height as well. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side. Largest widths may need 3 feet.
Color: Silver
Weight: 1.5 lbs
Aspen LED Light
Spotlight your graphics like artwork in a museum!
The Aspen Small Light consumes 50 watts, is halogen, and has a slender Silver body with power cord. To install light to Aspen frame, angle included clip into line groove and drop it in. Clip attaches to light.
Can be a custom accessory for Vail custom frames. Please note this light requires drilling into frame in order to attach and secure during setup.
Aspen Fabric Frame LED Light — BLACK
Use this ceiling hook to hang any Aspen Fabric Frame. Twist the screw into the square washer and slide into groove to connect. Use 1, 2 or 4 ceiling hooks.
Color: Silver
Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Frame sits low toward the floor when using Flat feet. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side. Largest widths may need 3 feet.
Color: Silver
Weight: 1.5 lbs
Dimensions: 6.25″ W x 19.625″ Length
Weight:
1.5 lbs
Sold in quantity of 1, free-stand the Aspen Fabric Frame on any floor with feet! Side feet add a different look than feet that install underneath the frame. Use smaller Aspen widths for entrance signage and larger widths as background signage. It is recommended to purchase 2 feet, one per side.
Color: Silver
Weight: 1.5 lbs
Hang the Aspen on the wall using Aspen Wall Mount Accessory. Sold in quantities of 1, it is recommended to purchase 4 wall mounts—one in each corner—to properly mount fixture to wall and display Aspen SEG Fabric Frame as intended.
To install:
After you make your necessary measurements, screw the wall mounts into the wall, place the frame around mounts, tighten socket screws slightly to add pressure to frame, then install graphics. Note: You may want to hold the frame (sans graphics) up on the wall while you are deciding on the placement of the wall mounts. Just be sure that the wall mounts are on the inside of the frame, and the vertical screws (which work by applying pressure to the frame) will be able to touch the frame.
1" Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides ($2.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.
Spring-loaded telescopic back leg insures graphic tension "Footless" Design, floor-to-top graphics Fully adjustable, hook loop included Strong-Rigid-Simple
Weight: 7 Lbs.
Size:
Width 24"
Height adjustable from 48" to 96"
Stand Color: BLACK ONLY
Graphics turnaround:
2 business days after proofs are approved. Please call for production schedule if you need it sooner.
1″ Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides (Call Us on number to get Customised Quote.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.
1″ Velcro strips have adhesive backing that can stick to banners, laminated prints, pvc, etc. Perfect for use with graphics on Big Wave Pop Ups and Panel Displays. qty 1=1 linear foot Select Hook and/or Loop: 1. Hook side only ($1.00 per linear feet) 2. Loop side only ($1.00 per linear feet) 3. Both Hook & Loop sides (Call Us on number to get Customised Quote.00 per linear feet) Note: Quantity is for per linear feet. Available in white only.
Brass Grommets come as one (1) set which include the top and bottom rings. 2 rings = 1 each
Silver Grommets come as one (1) set which include the top and bottom rings. 2 rings = 1 each
How many pole pockets would you like? Please enter the quantity of sides.
1″ Velcro strips have adhesive backing that can stick to vinyl banners, laminated prints, pvc, and can be sewn onto fabric!
By selecting this item, you with get both Hook & Loop by the foot.
Note: Available in white only, Quantity 1 = 1 foot
Hem & Grommets are priced by linear foot. Please enter the amount of linear feet you will need in the box.
Ex. 12 LF = 12 Qty.
Black Grommets come as one (1) set which include the top and bottom rings. 2 rings = 1 each
Hemming is a complimentary service. Please enter the amount of linear feet you will need hemmed in the box.
Ex. 12 LF = 12 Qty.
Magnetic strips on sides of panels magnetically attach to channel bars on frame. Price is per linear foot.
This solid, square base is another base option to display your flag indoors. Selecting this option with give you the base to fit a size Medium, Large or Extra Large Feather Flag or Teardrop Flag.
Poll Insert:
4" tall
7/8" diameter
16 lbs
14"L x 14"W x .25"H
This solid, square base is another base option to display your flag indoors. Selecting this option with give you the base to fit a size Small Feather Flag or Teardrop Flag.
Poll Insert:
4" tall
11/16" diameter6 lbs
11.25"L x 11.25"W x .25"H
Selecting this product will give you the spike base that fits the Mamba flags in sizes: Small, Medium and Large. Use on any grassy area or other naturally-soft grounds. Watch this flag swivel in light winds as it displays your message.
Product Overview:
Once filled with water, the weight of this outdoor water base will provide more stability for your flag on a windy day. Selecting this product will give you a water base with an adapter used for MEDIUM, LARGE OR EXTRA LARGE Feather or Teardrop flags; it will also fit ALL SIZES or the Mamba flag.
Product Dimensions:
16"W x 6"H x 16"D
Water Weight:
Up to 25 lbs (About 2.5 gallons of water)
Call Now
