The Puggle Roll Up is our new Premium roll up that has a bright silver color, a sleek and curvy style and a wide base. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished in anodized aluminum and silver color end plates.
Puggle Roll Up Graphic Package Includes:
Single-Sided Super Flat Vinyl Graphic
Silver Base
Support Pole
Clamp Bar
Travel Bag
Graphic ships assembled in base.
Display Dimensions: 33.5"w x 80"h x 7"d Graphic Dimensions: 33.5"w x 80"h Shipping Weight: 12 lbs Shipping Dimensions: 36.5"l x 9"w x 4"h
The Mozzie Roll Up is our new Economy roll up. Its slim base with 2 swivel feet add to the fact that it’s very lightweight. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished with anodized aluminum and black plastic end plates.
Mozzie Roll Up Stand Only Includes:
Silver Base
Support Pole
Clamp Bar
Travel Bag
Display Dimensions: 33.5″w x 80″h x 12″d Shipping Weight: 6 lbs Shipping Dimensions: 36″l x 12.5″w x 9″h
The Mozzie Roll Up is our new Economy roll up. Its slim base with 2 swivel feet add to the fact that it's very lightweight. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished with anodized aluminum and black plastic end plates.
Mozzie Roll Up Graphic Package Includes:
Single-Sided Super Flat Vinyl Graphic
Silver Base
Support Pole
Clamp Bar
Travel Bag
Graphic ships assembled in base.
Graphic Dimensions: 33.5"w x 80"h Display Dimensions: 33.5"w x 80"h x 12"d Shipping Weight: 7 lbs Shipping Dimensions: 36"l x 12.5"w x 9"h
The Brumby Roll Up is our new Mid Range roll up with a half moon shaped base. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished in anodized aluminum and black plastic end plates.
Brumby Roll Up Graphic Package Includes:
Single-Sided Super Flat Vinyl Graphic
Silver Base
Support Pole
Clamp Bar
Travel Bag
Graphic ships assembled in base.
Display Dimension: 33.5"w x 79"h x 8"d
Graphic Dimensions: 33.5"w x 79"h Shipping Weight: 11 lbs Shipping Dimensions: 36.5"l x 9"w x 5"h
The Brumby Roll Up is our new Mid Range roll up with a half moon shaped base. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished in anodized aluminum and black plastic end plates.
This protective container compatible with all of our trade show displays. Two heavy-duty buckles secure the lid to the body to ensure every piece of your display components arrives at its destination safely. The hard case also doubles as a podium that can be used to demonstrate products or to exhibit promotional literature. Using the included podium conversion poles and optional podium graphic, you can transform the case into a podium in minutes.
Our Tension Displays consist of a lightweight but durable aluminum hardware and a Fabric Dye-Sublimated Print. The hardware is inserted inside the print, much like a pillow into a pillowcase. The fabric print is stretched tight across the frame and zipped close.
Our Tension Displays consist of a lightweight but durable aluminum hardware and a Fabric Dye-Sublimated Print. The hardware is inserted inside the print, much like a pillow into a pillowcase. The fabric print is stretched tight across the frame and zipped close.
Our Tension Displays consist of a lightweight but durable aluminum hardware and a Fabric Dye-Sublimated Print. The hardware is inserted inside the print, much like a pillow into a pillowcase. The fabric print is stretched tight across the frame and zipped close.
Features:
High resolution digitally printed at 720 x 720
Optional double sided is available
Dye sublimation
Scratch resistant
Washable
Our Tension Displays consist of a lightweight but durable aluminum hardware and a Fabric Dye-Sublimated Print. The hardware is inserted inside the print, much like a pillow into a pillowcase. The fabric print is stretched tight across the frame and zipped close.
Our Tension Displays consist of a lightweight but durable aluminum hardware and a Fabric Dye-Sublimated Print. The hardware is inserted inside the print, much like a pillow into a pillowcase. The fabric print is stretched tight across the frame and zipped close.
Features:
High resolution digitally printed at 720 x 720
Optional double sided is available
Dye sublimation
Scratch resistant
Washable
Step up your game with the Silverstep retractable banner stand. Reusable, the Silverstep’s durable canvas lead won’t rip on the first change out or thereafter. Moreover, the canvas lead has a velcro attachment which enables easy graphic change out. Chrome magnetic end caps make for easy-to-access side panels during graphic installation. The end caps also house the tension pin, plus add a finished, professional appearance to the Silverstep base. It’s wide aluminum base and adjustable feet provide stability. Inside the adjustable aluminum pole is a bungee cord to help guide pole set up and keep pole parts together so you won’t ever lose half of your pole.
Clamp Top Bar (Recommended)
Only covering about ⅜” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.
Velcro Top Bar
Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.
24”w Graphic Package Includes:
(1) 85”h Single-Sided Fabric Graphic (installed)
(1) Silver Retractable Base with End Caps
(1) Telescopic Support Pole
(1) Clamp Top Bar with End Caps
(1) Silverstep Travel Bag
Features
Material: Banner Fabric (Fab Ban)
Print Process: Full-Color Dye Sublimation
Warranty: Lifetime on hardware; one (1) year on graphics
Stand Size: 25.5”W x 3”H x 9.5”D
Shipping Dimensions:(1) box 6”L x 13”W x 29”H
Shipping Weight: 13 lbs
Artwork Size: 24”W x 85”H (we will add a 6” bleed at the bottom)
Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.
Hardware Setup:Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole.Stickers on base and pole help guide banner set up.
The Econoroll packs great value into an easy-to-use durable and attractive stand.
Display Total Height: 82″
Base Size: 34″W x 3.5″H x 3.5″D (15″D with feet)
Construction:
Finished in anodized aluminum and heavy-duty plastic end plates. Banner attached by clamp bar on top and double stick tape on the bottom.
Includes:
Aluminum base
Support pole
Top Clamp Bar
Support Pole w/ Hook
Econo travel bag (36″ x 4″ x 4″)
The Econoroll packs great value into an easy-to-use durable and attractive stand.
Display Total Height: 82″
Base Size: 34″W x 3.5″H x 3.5″D (15″D with feet)
Construction:
Finished in anodized aluminum and heavy-duty plastic end plates. Banner attached by clamp bar on top and double stick tape on the bottom.
The Econoroll packs great value into an easy-to-use durable and attractive stand.
Display Total Height: 82″
Base Size: 37″W x 3.5″H x 3.5″D (15″D with feet)
Construction:
Finished in anodized aluminum and heavy-duty plastic end plates. Banner attached by clamp bar on top and double stick tape on the bottom.
The Econo Roll packs great value into an easy-to-use durable and attractive stand.
Display Total Height: 82″
Base Size: 34″W x 3.5″H x 3.5″D (15″D with feet)
Graphic Materials: Hybrid Vinyl
Template Size: 33.5″ W x 80″ H
Construction:
Finished in anodized aluminum and heavy-duty plastic end plates. Banner attached by clamp bar on top and double stick tape on the bottom.
Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
This is one (1) replacement graphic for the 6 ft. side* of the 6 ft. Big Sky Counter. Order quantity 2 if replacing both front and back sides of a 6 ft. wide frame.
*If replacing the 2 ft. outside ends as well, order 2 ft. graphic only(s) separately.
Includes:
(1) SEG Fabric Graphic for 6 ft. side
How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.
This is four (4) replacement graphics for the 5 ft. Big Sky Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 4 graphic replacements, please order Deco Fabric per sq. ft. using the “Printing” tab.
Includes:
(4) SEG Fabric Graphics 5’w x 8’h
Graphic Size: 60.5”w x 98”h (including 1” bleed around perimeter)
How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.
Display Size: 5’L x 8’H x 5’D
5 ft. Hardware Package Includes:
(4) Vertical Extrusion pieces with connectors
(8) Horizontal Extrusion pieces with connectors
(1) Torx Key
Warranty: Lifetime on Frame
Shipping Weight: 40 lbs Shipping Dims: 97″L x 7″W x 10″H
This is four (4) replacement graphics for the 3 ft. Big Sky Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 4 graphic replacements, please order Deco Fabric per sq. ft. using the "Printing" tab.
Includes Big Sky Tower:
(4) SEG Fabric Graphics 3'w x 8'h
Graphic Size: 36.5”w x 98”h (including 1” bleed around perimeter)
How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.
Display Size: 5’L x 8’H x 5’D
5 ft. Graphic Package Includes:
(4) SEG Fabric Graphics 5’w x 8’h
(4) Vertical Extrusion pieces with connectors
(8) Horizontal Extrusion pieces with connectors
(1) Torx Key
Warranty:
Lifetime on Frame
One (1) year on graphics
Graphic Size: 60.5″w x 98″h Shipping Weight: 40 lbs Shipping Dims: 97″L x 7″W x 10″H
Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.
Display Size: 4’L x 8’H x 4’D
4 ft. Hardware Package Includes:
(4) Vertical Extrusion pieces with connectors
(8) Horizontal Extrusion pieces with connectors
(1) Torx Key
Warranty: Lifetime on Frame
Shipping Weight: 32 lbs Shipping Dims: 97″L x 7″W x 10″H
This is four (4) replacement graphics for the 4 ft. Big Sky Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 4 graphic replacements, please order Deco Fabric per sq. ft. using the "Printing" tab.
Includes:
(4) SEG Fabric Graphics 4'w x 8'h
Graphic Size: 48.5”w x 98”h (including 1” bleed around perimeter)
How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.
Display Size: 4'L x 8'H x 4'D
4 ft. Graphic Package Includes:
(4) SEG Fabric Graphics 4'w x 8'h
(4) Vertical Extrusion pieces with connectors
(8) Horizontal Extrusion pieces with connectors
(1) Torx Key
Warranty:
Lifetime on Frame
One (1) year on graphics
Graphic Size: 48.5"w x 98"h Shipping Weight: 32 lbs Shipping Dims: 97"L x 7"W x 10"H
This is one (1) replacement graphic for the 4 ft. side* of the 4 ft. Big Sky Counter. Order quantity 2 if replacing both front and back sides of a 4 ft. wide frame.
*If replacing the 2 ft. outside ends as well, order 2 ft. graphic only(s) separately.
Includes:
(1) SEG Fabric Graphic for 4 ft. side
How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
This is one (1) replacement graphic for the 2 ft. side of a Big Sky Counter. All Big Sky Counter outside ends* are 2 ft. wide. Order quantity 2+ if replacing more than one 2 ft. side.
*Front and Back graphics are either 2 ft., 4 ft. or 6 ft. wide, depending on the frame size.
Includes:
(1) SEG Fabric Graphic for 2 ft. side
How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Tower comes in varied sizes. Big Sky Tower accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Backlit option is available.
Display Size: 3'L x 8'H x 3'D
3 ft. Graphic Package Includes:
(4) SEG Fabric Graphics 3'w x 8'h
(4) Vertical Extrusion pieces with connectors
(8) Horizontal Extrusion pieces with connectors
(1) Torx Key
Warranty:
Lifetime on Frame
One (1) year on graphics
Graphic Size: 36.5"w x 98"h Shipping Weight: 26 lbs Shipping Dims: 97"L x 7"W x 10"H
Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
2 ft. Graphic Package Includes:
(4) SEG Fabric Graphics for 2 ft. sides
(4) Vertical Extrusion pieces with connectors
(8) Horizontal Extrusion pieces with connectors
(1) Acrylic Countertop
(1) Torx Key
Warranty:
Lifetime on Frame
1 year on Graphics
Display Size: 24”L x 40”H x 24″D Template Size: 26”w x 42”h (including 1” bleed around perimeter)
Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
Big Sky Counter is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Counter comes in varied sizes. Big Sky Counter accepts four individual custom fabric graphics, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Repeat three times. Place the frosted acrylic countertop last.
The Aluminum Snap Frame is ideal for both indoor and outdoor use. It's easy-to-load snap frames come complete with glare reducing overlays to cover 23.25" x 33" signs. Good For Indoors and Outdoors. Comes With Two Plastic Cover Sheets
The Aluminum Snap Frame is ideal for both indoor and outdoor use. It's easy-to-load snap frames come complete with glare reducing overlays to cover 23.25" x 33" signs. Good For Indoors and Outdoors. Comes With Two Plastic Cover Sheets
Looking for an interactive attraction? Engage others with the brand new Jotter Tablet Display--A great tool for trade shows, office lobbies, or retail! The Jotter stand has a pivotal head, allowing you to rotate the tablet 360˚ and adjust the angle 135˚. Simply, insert the tablet and use the key to lock the case. The tablet is snug, secure and ready to use. The case allows for a working front and back camera as well. Use them anywhere you want to be hands-free. The Jotter Tabletop Tablet Display can be used to customize any display or countertop. Compatible with 2nd, 3rd and 4th generation iPad tablets. Available in 3 styles. Choose from Black or White.
Construction:
Aluminum Pole
Steel Frame
Steel Base
Frame Size: 8.25"W x 11.75"H x 1"D Total Height: 50" (vertically), 48" (horizontally) Base Size: 14.5"Width Pole Perimeter: 10" Tablet Display Size: 6"W x 8"H
(Only for iPad 2,3 or 4 version) Pole Diameter (neck of stand): 3"
Weight: 22 lbs
Shipping Dimensions: 42" x 15.5" x 6"
Warranty: 1 year
Looking for an interactive attraction? Engage others with the brand new Jotter Tablet Display--A great tool for trade shows, office lobbies, or retail! The Jotter stand has a pivotal head, allowing you to rotate the tablet 360˚ and adjust the angle 135˚. Simply, insert the tablet and use the key to lock the case. The tablet is snug, secure and ready to use. The case allows for a working front and back camera as well. Use them anywhere you want to be hands-free. The Jotter Tabletop Tablet Display can be used to customize any display or countertop. To mount, simply drill into desired tabletop or display, and voila! Compatible with 2nd, 3rd and 4th generation iPad and iPad Air tablets. Available in 3 styles. Choose from Black or White.
(* mounted screws are not included in the package)
Frame Size: 8.25"W x 11.75"H x 1"D
Pole Length: 5.5"
Base Diameter: 3"
Tablet Display Size: 6"W x 8"H
(Only for iPad 2,3 or 4 version)
Weight: 5 lbs
Shipping Dimensions: 5" x 9" x 12"
Warranty: 1 year
Looking for an interactive attraction? Engage others with the brand new Jotter Tablet Display--A great tool for trade shows, office lobbies, or retail! The Jotter stand has a pivotal head, allowing you to rotate the tablet 360˚ and adjust the angle 135˚. Simply, insert the tablet and use the key to lock the case. The tablet is snug, secure and ready to use. The case allows for a working front and back camera as well. Use them anywhere you want to be hands-free. The Jotter Tabletop Tablet Display can be used to customize any display or countertop. To mount, simply drill into desired tabletop or display, and voila! Compatible with 2nd, 3rd and 4th generation iPad tablets. Available in 3 styles. Choose from Black or White.
(* mounted screws are not included in the package)
Frame Size: 8.25"W x 11.75"H x 1"D
Pole Length: 5.5"
Base Diameter: 3"
Tablet Display Size: 6"W x 8"H
(Only for iPad 2,3 or 4 version)
Weight: 5 lbs
Shipping Dimensions: 5" x 9" x 12"
Warranty: 1 year
Looking for an interactive attraction? Engage others with the brand new Jotter Tablet Display--A great tool for trade shows, office lobbies, or retail! The Jotter stand has a pivotal head, allowing you to rotate the tablet 360˚ and adjust the angle 135˚. Simply, insert the tablet and use the key to lock the case. The tablet is snug, secure and ready to use. The case allows for a working front and back camera as well. Use them anywhere you want to be hands-free. The Jotter Tabletop Tablet Display can be used to customize any display or counter top. Compatible with 2nd, 3rd and 4th generation iPad and iPad Air tablets. Available in 3 styles. Choose from Black or White.
Construction:
Aluminum Pole
Steel Frame
Steel Base
Frame Size: 8.25"W x 11.75"H x 1"D Total Height: 50" (vertically), 48" (horizontally) Base Size: 12.5" (Front Width) x 16.5"D x 11.5" (Back Width) Tablet Display Size: 6"W x 8"H Pole Diameter (neck of stand): 1.5" Weight: 22 lbs
Shipping Dimensions: 45"L x 14"W x 4"H Warranty: 1 year
Similar to IS-1 display stand, the IS-2 features a 1/4" top loading slot that accepts foam core boards and signs. Graphics must be mounted to 1/4" board.
Looking for an interactive attraction? Engage others with the brand new Jotter Tablet Display--A great tool for trade shows, office lobbies, or retail! The Jotter stand has a pivotal head, allowing you to rotate the tablet 360˚ and adjust the angle 135˚. Simply, insert the tablet and use the key to lock the case. The tablet is snug, secure and ready to use. The case allows for a working front and back camera as well. Use them anywhere you want to be hands-free. The Jotter Tabletop Tablet Display can be used to customize any display or countertop. Compatible with 2nd, 3rd and 4th generation iPad tablets. Available in 3 styles. Choose from Black or White.
Construction:
Aluminum Pole
Steel Frame
Steel Base
Frame Size: 8.25"W x 11.75"H x 1"D Total Height: 50" (vertically), 48" (horizontally) Base Size: 12.5" (Front Width) x 16.5"D x 11.5" (Back Width) Tablet Display Size: 6"W x 8"H
(Only for iPad 2,3 or 4 version) Pole Diameter (neck of stand): 1.5"
Weight: 22 lbs
Shipping Dimensions: 45" x 14" x 4"
Warranty: 1 year
This display stand features a 1/4" top loading slot that accepts foam core boards and signs. Graphics must be mounted to 1/4" board. IS-1 stands 60" high from the ground.
Similar to IS-1 display stand, the IS-2 features a 1/4" top loading slot that accepts foam core boards and signs. Graphics must be mounted to 1/4" board.
This display stand features a 1/4" top loading slot that accepts foam core boards and signs. Graphics must be mounted to 1/4" board. IS-1 stands 60" high from the ground.
This Large Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag. Package includes:
Pole
Spike base
Printed banner (double-sided)
Nylon bag
Height: 14.5 ft. Warranty: One (1) year on hardware and graphics
This is the hardware for the Medium Teardrop Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.
This Small Teardrop banner stand outdoor flag comes with a single-sided custom print, stand and spike base. With the default spike base, use this 8.2 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Pole
X base
Printed banner (single-sided)
Nylon bag
Height: 8.2 ft. Warranty: One (1) year on hardware and graphics
This Medium Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
X base
Printed banner (double-sided)
Nylon bag
Height: 11 ft. Warranty: One (1) year on hardware and graphics
This Small Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
This Small Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
Spike base
Printed banner (double-sided)
Nylon bag
Height: 8.2 ft. Warranty: One (1) year on hardware and graphics
This Medium Teardrop Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided small teardrop graphic, we print two (2) separate flags, and we place a silver-gray blocker material in the middle. All 3 three pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
This Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 16.4ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
This 16.4ft Large Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
X Base
Printed Banner (Double-Sided)
Nylon Bag
Height: 16.4 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year warranty on hardware and graphics
This Medium Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Pole
X Base
Printed Banner (Single-Sided)
Nylon Bag
Height: 15.75 ft. Base Pole Diameter: 1/16" (1.0625")
This 15.75 ft. Medium Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
X Base
Printed Banner (Double-Sided)
Nylon Bag
Height: 15.75 ft. Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year warranty on hardware and graphics
Option Base: Water Base hold up to about 2.5 gallons of water.
This Small Feather Flag graphic package comes with single-sided custom print, stand and spike base. With the default spike base, use this 9.84ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Pole
X Base
Printed Banner (Single-Sided)
Nylon Bag
Height: 9.84 ft. Base Pole Diameter: 0.875" (7/8") Warranty: One (1) year on hardware and graphics
This is the hardware for the Medium Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 15.75 ft. Includes:
This is the hardware for the Small Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 9.84 ft. Includes:
This 9.84 ft. Small Feather Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
X Base
Printed Banner (Double-Sided)
Nylon Bag
Height: 9.84 ft. Base Pole Diameter: 0.875" (7/8")
This Medium Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Pole
Spike Base
Printed Banner (Single-Sided)
Nylon Bag
Height: 15.75 ft. Base Pole Diameter: 1/16" (1.0625")
This 9.84 ft. Small Feather Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
Spike Base
Printed Banner (Double-Sided)
Nylon Bag
Height: 9.84 ft. Base Pole Diameter: 0.875" (7/8")
This 15.75 ft. Medium Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Pole
Spike Base
Printed Banner (Double-Sided)
Nylon Bag
Height: 15.75 ft. Base Pole Diameter: 1/16″ (1.0625″)
Warranty: One (1) year warranty on hardware and graphics
Optional Base: Water Base hold up to about 2.5 gallons of water.
Looking for a compact backlit display? Be the coolest kid on the block showing off this beauty with the flip of a switch, literally. The aluminum frame has been designed for easy assembly. Connect with a flip-lock mechanism. With the rubber beading, sewn on the edge of the fabric graphics, simply push the edges into the frame's recessed grooves to install. Removable graphics allows you to keep the frame and replace new graphics as desired.
Looking for a compact backlit display? Be the coolest kid on the block showing off this beauty with the flip of a switch, literally. The aluminum frame has been designed for easy assembly. Connect with a flip-lock mechanism. With the rubber beading, sewn on the edge of the fabric graphics, simply push the edges into the frame's recessed grooves to install. Removable graphics allows you to keep the frame and replace new graphics as desired.
Looking for a compact backlit display? Be the coolest kid on the block showing off this beauty with the flip of a switch, literally. The aluminum frame has been designed for easy assembly. Connect with a flip-lock mechanism. With the rubber beading, sewn on the edge of the fabric graphics, simply push the edges into the frame's recessed grooves to install. Removable graphics allows you to keep the frame and replace new graphics as desired.
Looking for a compact backlit display? Be the coolest kid on the block showing off this beauty with the flip of a switch, literally. The aluminum frame has been designed for easy assembly. Connect with a flip-lock mechanism. With the rubber beading, sewn on the edge of the fabric graphics, simply push the edges into the frame's recessed grooves to install. Removable graphics allows you to keep the frame and replace new graphics as desired.
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5″ W x 66″ or 90″ H or 114 h x 9.75″ D
Template Size: 38″ W x 66″ or 90″ or 112″ H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights – Dimensions –
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 61 W x 66" or 90 H or 138 h x 9.75" D
Template Size: 62 W x 66 H or 90" H or 138" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 25 lbs (stand only) 28 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 61 W x 66" or 90 H or 138 h x 9.75" D
Template Size: 62 W x 66 H or 90" H or 138" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 25 lbs (stand only) 28 lbs (with graphic)
Set up the EZ Extend in no-time—less than five minutes! This sturdy and balanced display includes a steel base, available in widths of 2ft. to 5ft., allowing you to display merchandise over your fabric graphic using slatwall accessories like hooks, hangers, shelves and baskets. Add 1ft. or 2ft. extender tubes to increase height from the standard 7.5ft. to 8.5ft., 9.5ft., 10.5ft. or 11.5ft. Want it shorter? Just take away tubes for a 5.5ft. or 6.5ft. height.
To assemble, secure the longest vertical tubes onto the base using the included allen wrench. Add the bottom horizontal support tube and secure. Snap on the remaining vertical tubes, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly cover with the pillowcase graphic. Using the industrial-size zipper, zip underneath the bottom support pole, maximizing fabric tension. Choose a single-sided (pick white or black back fabric) or double-sided dye-sublimated stretch fabric print.
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 61 W x 66" or 90 H or 138 h x 9.75" D
Template Size: 62 W x 66 H or 90" H or 138" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 25 lbs (stand only) 28 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5″W x 66″ or 90″H or 114 h x 9.75″D
Template Size: 38″W x 66″ or 90″ or 112″H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights – Dimensions –
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Set up the EZ Extend in no-time—less than five minutes! This sturdy and balanced display includes a steel base, available in widths of 2ft. to 5ft., allowing you to display merchandise over your fabric graphic using slatwall accessories like hooks, hangers, shelves and baskets. Add 1ft. or 2ft. extender tubes to increase height from the standard 7.5ft. to 8.5ft., 9.5ft., 10.5ft. or 11.5ft. Want it shorter? Just take away tubes for a 5.5ft. or 6.5ft. height.
To assemble, secure the longest vertical tubes onto the base using the included allen wrench. Add the bottom horizontal support tube and secure. Snap on the remaining vertical tubes, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly cover with the pillowcase graphic. Using the industrial-size zipper, zip underneath the bottom support pole, maximizing fabric tension. Choose a single-sided (pick white or black back fabric) or double-sided dye-sublimated stretch fabric print.
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75"D
Template Size: 38"W x 66" or 90" or 112"H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Set up the EZ Extend in no-time—less than five minutes! This sturdy and balanced display includes a steel base, available in widths of 2ft. to 5ft., allowing you to display merchandise over your fabric graphic using slatwall accessories like hooks, hangers, shelves and baskets. Add 1ft. or 2ft. extender tubes to increase height from the standard 7.5ft. to 8.5ft., 9.5ft., 10.5ft. or 11.5ft. Want it shorter? Just take away tubes for a 5.5ft. or 6.5ft. height.
To assemble, secure the longest vertical tubes onto the base using the included allen wrench. Add the bottom horizontal support tube and secure. Snap on the remaining vertical tubes, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly cover with the pillowcase graphic. Using the industrial-size zipper, zip underneath the bottom support pole, maximizing fabric tension. Choose a single-sided (pick white or black back fabric) or double-sided dye-sublimated stretch fabric print.
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75 D
Template Size: 38"W x 66" or 90" or 112" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Set up the EZ Extend in no-time—less than five minutes! This sturdy and balanced display includes a steel base, available in widths of 2ft. to 5ft., allowing you to display merchandise over your fabric graphic using slatwall accessories like hooks, hangers, shelves and baskets. Add 1ft. or 2ft. extender tubes to increase height from the standard 7.5ft. to 8.5ft., 9.5ft., 10.5ft. or 11.5ft. Want it shorter? Just take away tubes for a 5.5ft. or 6.5ft. height.
To assemble, secure the longest vertical tubes onto the base using the included allen wrench. Add the bottom horizontal support tube and secure. Snap on the remaining vertical tubes, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly cover with the pillowcase graphic. Using the industrial-size zipper, zip underneath the bottom support pole, maximizing fabric tension. Choose a single-sided (pick white or black back fabric) or double-sided dye-sublimated stretch fabric print.
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75 D
Template Size: 38"W x 66" or 90" or 112" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Set up the EZ Extend in no-time—less than five minutes! This sturdy and balanced display includes a steel base, available in widths of 2ft. to 5ft., allowing you to display merchandise over your fabric graphic using slatwall accessories like hooks, hangers, shelves and baskets. Add 1ft. or 2ft. extender tubes to increase height from the standard 7.5ft. to 8.5ft., 9.5ft., 10.5ft. or 11.5ft. Want it shorter? Just take away tubes for a 5.5ft. or 6.5ft. height.
To assemble, secure the longest vertical tubes onto the base using the included allen wrench. Add the bottom horizontal support tube and secure. Snap on the remaining vertical tubes, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly cover with the pillowcase graphic. Using the industrial-size zipper, zip underneath the bottom support pole, maximizing fabric tension. Choose a single-sided (pick white or black back fabric) or double-sided dye-sublimated stretch fabric print.
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75"D
Template Size: 38"W x 66" or 90" or 112"H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75 D
Template Size: 38"W x 66" or 90" or 112" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90" H or 114 h x 9.75"D
Template Size: 38"W x 66" or 90" or 112"H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75"D
Template Size: 38"W x 66" or 90" or 112"H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5" W x 66" or 90" H or 114 h x 9.75" D
Template Size: 38" W x 66" or 90" or 112" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)
Expedite your banner stand setup time while adding lavish appeal with our newest EZ Tube fabric display the EZ Extend! Hardware comes stock at 7.5ft tall with height options of 5.5ft, 8.5ft, and 9.5ft. Customize a single-sided (choose white or black back fabric) or double-sided dye- sublimated stretch fabric print. To assemble, secure the longest vertical poles onto the black steel base using the included allen wrench. Add the bottom horizontal support pole and secure. Snap on the remaining vertical poles, then top frame with the curved bar to complete. Tilt or lay down EZ Extend to swiftly drape with the pillowcase graphic. Using the industrial-size zipper, zip underneath the support pole, maximizing fabric tension.
Display Dimension: 37.5"W x 66" or 90"H or 114 h x 9.75 D
Template Size: 38"W x 66" or 90" or 112" H
Graphic Material: Stretch Fabric
Graphic Finishing: Sewn on the left, right and top, with a zipper at the bottom.
Construction: Steel base with aluminum tube frame
Weights - Dimensions -
Shipping Weight: 16 lbs (stand only) 18 lbs (with graphic)