​

Single-Sided Graphic Replacement for the Vail-40S 8’ x 9’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 98″W x 110″H
Shipping Dimensions: (1) box 20″L x 12″W x 6″H
Shipping Weight: 4 lbs

​

Vail-40D 5’ x 5’ Frame Only. The VAIL-40D is a double-sided extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Frame Includes:
(1) 4-Sided Frame (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame
Frame Size: 60″W x 60″H x 1.57″D
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

​

Vail-40D 3’ x 7’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 36″W x 84″H x 1.57″D
Artwork Size: 38″W x 86″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Double-Sided Graphic Replacement for the Vail-40D 2’ x 3’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 26″W x 38″H
Shipping Dimensions: 12″L x 9″W x 6″H
Shipping Weight: 4 lbs

​

Vail-40D 6’ x 6’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 72″W x 72″H x 1.57″D
Artwork Size: 74″W x 74″H
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

​

Vail-40D 9’ x 6’ Frame Only. The VAIL-40D is a double-sided extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Frame Includes:
(1) 4-sided frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench ((2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 6′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 108″W x 72″H x 1.57″D
Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H

​

Double-Sided Graphic Replacement for the Vail-40D 9’ x 6’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 110″W x 74″H
Shipping Dimensions: 20″L x 16″W x 6″H
Shipping Weight: 8 lbs

​

Vail-40D 10’ x 8’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench(3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key(2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Backdrop, Photo-ops, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation

Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 10’ edge and one 8′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Split Connectors
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 120″W x 96″H x 1.57″D
Artwork Size: 122″W x 98″H
Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H

​

Vail-40D 5’ x 4’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 60″W x 48″H x 1.57″D
Artwork Size: 62″W x 50″H
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

​

Double-Sided Graphic Replacement for the Vail-40D 5’ x 5’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 62″W x 62″H
Shipping Dimensions: 16″L x 10″W x 6″H
Shipping Weight: 6 lbs

​

Vail-40D 3’ x 8’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 36″W x 96″H x 1.57″D
Artwork Size: 38″W x 98″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Vail-40D 7’ x 4’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)
Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem)(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 84″W x 48″H x 1.57″D
Artwork Size: 86″W x 50″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Single-Sided Graphic Replacement for the Vail-40D 3’ x 7’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 38″W x 86″H
Shipping Dimensions: (1) box 16″L x 10″W x 6″H
Shipping Weight: 3 lbs

​

Vail-40D 2’ x 3’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL L-Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 24″W x 36″H x 1.57″D
Artwork Size: 26″W x 38″H
Shipping Dimensions: (1) box 49.75″L x 7.25″W x 6.5″H

​

Sleek and “EZ”, our tension fabric systems are a great alternative to standard backwall displays. Quickly assembled in just 5 minutes, slide the tubes together to make the frame and lock in place with a push button snap.  Then, simply pull the pillowcase-like graphic over the frame and zip it shut. The zipper, hidden from view, tightens the stretch fabric beautifully displaying your image.  Disassembled, this lightweight frame and graphic fits inside its included bag.

Graphic Package Includes:

• (1) 10 ft. Aluminum Frame
• 1) EZ Tube Travel Bag with wheels
• (1) Double-Sided Graphic Print

Features
Display Size: 120″W x 89″H x 22″D
Template Size: Front side: 122″W x 88.25″H; Back side: 123.5″W x 87.25″H
Shipping Size: 53”L x 13”W x 8”H
Material: Stretch Fabric, Dye-Sublimation
Weight: 32 lbs
Warranty: Lifetime on Hardware. One (1) year on Graphic.

​

Vail-40D 10’ x 9’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem)(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (5) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Backdrop, Photo-ops, Showrooms, Step & Repeat, Etc.

Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: To make one edge of the frame, take two matching-sized extrusions and, between, add Split Connector; tighten. Repeat this three times. Take one completed 10’ and 9’ edge and slide in Corner Connector; tighten. Repeat this three times. Connect VAIL-40C to the other; tighten. Vertically insert ends of completed VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Split Connectors
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 120″W x 108″H x 1.57″D
Artwork Size: 122″W x 110″H
Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H

​

This connector can be used to configure Lumiere frames in a 90 degree or archway configuration as shown below:

​

This connector can be used to configure Lumiere frames in a side-by-side or stacked configuration as shown below:

​

Introducing the EZ Extend Circle 3 Display! Score big attention with this simple hoop frame covered in stunning custom graphics. Signature lightweight aluminum snap tubes connect together. Single- or double-sided fabric pillowcase graphic easily zips taut. Iron base provides stability.

EZ Extend Circle Display (Frame Only) Includes:
5 Curved Tubes2 Base Legs1 Base
Display Dimensions: 84″w (7′ dia) x 87″h x 10″d
Shipping Weight: 25 lbs
Shipping Dimensions: 48.5″l x 13″w x 5″h

​

Introducing the EZ Extend Circle 5 Display! Score big attention with this simple hoop frame covered in stunning custom graphics. Signature lightweight aluminum snap tubes connect together. Single- or double-sided fabric pillowcase graphic easily zips taut. Iron base provides stability.

EZ Extend Circle 5 Display Graphic Package Includes:
• (4) Curved Tubes
• (2) Base Legs
• (1) Base

Display Dimensions: 59.75″W (5′ dia) x 72.375″H x 10″D
Shipping Weight: 21 lbs
Shipping Dimensions: 56″L x 15″W x 5″H

​

Introducing the EZ Extend Circle 3 Display! Score big attention with this simple hoop frame covered in stunning custom graphics. Signature lightweight aluminum snap tubes connect together. Single- or double-sided fabric pillowcase graphic easily zips taut. Iron base provides stability.

EZ Extend Circle 3 Display (Frame Only) Includes:
• (4) Curved Tubes
• (2) Base Legs
• (1) Base

Display Dimensions: 42″W (3.5′ dia) x 78″H x 10″D
Shipping Weight: 13 lbs
Shipping Dimensions: 38.5″L x 11″W x 4″H

​

This Rail fits the Heavy Duty Casita Canopy. Sold as qty 1. We recommend 1 rail for a backwall and 2 rails for each sidewall.

​

Looking for a portable retractable banner stand that’s a cinch to setup? The Cinch takes only a matter of seconds to setup and breakdown. Store the Cinch conveniently in its included travel bag.

Graphic Package Includes:
Hybrid Vinyl GraphicAluminum BaseSupport PoleTop Clamp BarTravel Bag

Dimensions: 35.5″w x 80″h x 14.5″d
Template: 33.5″w x 80″h (with 5″ bleed on bottom)

Warranty: 1 year on hardware and graphic

Note: The Cinch graphic package will arrive ready-to-go, with graphic installed.

​

Looking for a portable retractable banner stand that’s a cinch to setup? The Cinch takes only a matter of seconds to setup and breakdown. Store the Cinch conveniently in its included travel bag.

Frame Only Includes:

• Aluminum Base
• Support Pole
• Top Clamp Bar
• Travel Bag

Banner is not included in this selection, but we do recommend installing Vinyl material, such as Hybrid Vinyl or Super Flat Vinyl. 

Dimensions: 35.5″w x 80″h x 14.5″d
Warranty: 1 year on hardware

​

Looking for a portable retractable banner stand that’s a cinch to setup? The Cinch takes only a matter of seconds to setup and breakdown. Store the Cinch conveniently in its included travel bag.

Graphic Package Includes:
Super Flat Vinyl GraphicAluminum BaseSupport PoleTop Clamp BarTravel Bag

• Dimensions: 35.5″w x 80″h x 14.5″d
• Template: 33.5″w x 80″h (with 5″ bleed on bottom)

Warranty: 1 year on hardware and graphic

Note: The Cinch graphic package will arrive ready-to-go, with graphic installed.

​

The Puggle Roll Up is our new Premium roll up that has a bright silver color, a sleek and curvy style and a wide base. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished in anodized aluminum and silver color end plates.

Puggle Roll Up Stand Only Includes:

• Silver BaseSupport PoleClamp BarTravel Bag
• Display Dimensions: 33.5″w x 80″h x 7″d
• Shipping Weight: 12 lbs
• Shipping Dimensions: 36.5″l x 9″w x 4″h

​

The Mozzie Roll Up is our new Economy roll up. Its slim base with 2 swivel feet add to the fact that it’s very lightweight. Graphics attach by clamp bar on top and by double stick tape on bottom. Base is finished with anodized aluminum and black plastic end plates.

Mozzie Roll Up Stand Only Includes:

• Silver Base
• Support Pole
• Clamp Bar
• Travel Bag

Display Dimensions: 33.5″w x 80″h x 12″d
Shipping Weight: 6 lbs
Shipping Dimensions: 36″l x 12.5″w x 9″h