This is the hardware for the Medium Teardrop Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.
Package includes:
Warranty: One (1) year on hardware and graphics
This is the hardware for the Medium Teardrop Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Package includes:
Warranty: One (1) year on hardware
This 19.7ft Extra-Large Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we printed two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 19.7 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Extra-Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 19.7ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 19.7 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Double-Sided printed banner is a replacement graphic for the Extra-Large Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This Single-Sided printed banner is a replacement graphic for the Extra-Large Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This is the hardware for the Extra-Large Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height 19.7 ft.
Includes:
Height: 19.7 ft.
Warranty: One (1) year on hardware
This Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 16.4ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 16.4 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Extra Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 19.7ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 19.7 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Extra-Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 19.7ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 19.7 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Single-Sided printed banner is a replacement graphic for the Large Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This Double-Sided printed banner is a replacement graphic for the Large Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This is the hardware for the Extra-Large Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:
Heights: 19.7 ft.
Warranty: One (1) year on hardware
This 16.4ft Large Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 16.4 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year warranty on hardware and graphics
This is the hardware for the Large Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 16.4 ft.
Includes:
Height: 16.4 ft.
Warranty: One (1) year on hardware
This 16.4 ft. Large Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 16.4 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year warranty on hardware and graphics
This Medium Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Large Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 16.4 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 16.4 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Single-Sided printed banner is a replacement graphic for the Medium Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This 15.75 ft. Medium Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year warranty on hardware and graphics
Option Base: Water Base hold up to about 2.5 gallons of water.
This Double-Sided printed banner is a replacement graphic for the Small Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This Single-Sided printed banner is a replacement graphic for the Small Feather Banner Stand.
Material: Mesh Fabric, Dye-Sublimation
Warranty: One (1) year on graphics
This is the hardware for the Large Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:
Height: 16.4 ft.
Warranty: One (1) year on hardware
This Small Feather Flag graphic package comes with single-sided custom print, stand and spike base. With the default spike base, use this 9.84ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a ""bleed-through"" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 9.84 ft.
Base Pole Diameter: 0.875" (7/8")
Warranty: One (1) year on hardware and graphics
This is the hardware for the Medium Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 15.75 ft.
Includes:
Height: 15.75 ft.
Warranty: One (1) year on hardware
This is the hardware for the Small Feather Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel. Height is 9.84 ft.
Includes:
Height: 9.84 ft.
Warranty: One (1) year on hardware
This 9.84 ft. Small Feather Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 9.84 ft.
Base Pole Diameter: 0.875" (7/8")
Warranty: One (1) year on hardware and graphics
This is the hardware for the Small Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:
Height: 9.84 ft.
Warranty: One (1) year on hardware
This Medium Feather Flag graphic package comes with a single-sided custom print, stand and spike base. With the default spike base, use this 15.75ft tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 15.75 ft.
Base Pole Diameter: 1/16" (1.0625")
Warranty: One (1) year on hardware and graphics
This Small Feather Flag graphic package comes with single-sided custom print, stand and spike base. With the default spike base, use this 9.84 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting). The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Height: 9.84 ft.
Base Pole Diameter: 0.875" (7/8")
Warranty: One (1) year on hardware and graphics
This 9.84 ft. Small Feather Banner Stand is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 9.84 ft.
Base Pole Diameter: 0.875" (7/8")
Warranty: One (1) year on hardware and graphics
This 15.75 ft. Medium Feather Banner is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided feather graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Height: 15.75 ft.
Base Pole Diameter: 1/16″ (1.0625″)
Warranty: One (1) year warranty on hardware and graphics
Optional Base: Water Base hold up to about 2.5 gallons of water.
This is the hardware for the Medium Feather Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:
Height: 15.75 ft.
Warranty: One (1) year on hardware
This Double-Sided printed graphic is a replacement graphic for the 7ft Falcon Banner Stand.
Includes: Printed Banner (Double-Sided)
Template Size: 20.5"w x 63.25"h
Graphic Turnaround Time: 2 Business Days
Warranty: One (1) on graphics
This Single-Sided printed graphic is a replacement graphic for the 7ft Falcon Banner Stand.
Package includes: Printed Banner (Single-Sided)
Template Size: 20.5"w x 63.25"h
Graphic Turnaround Time: 2 Business Days
Warranty: One (1) year on graphics
This is the hardware for the 7ft Falcon Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.
Includes:
Warranty: One (1) year on hardware
This is the hardware for the 13ft Falcon Banner Stand with X-Base. The poles consist of materials such as aluminum, plastic and carbon fiber. The X-base is four-pronged and steel.
Includes:
Warranty: One (1) year on hardware
This is the hardware for the 7ft Falcon Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic, and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:
Warranty: One (1) year on hardware
This 7ft Falcon Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 7ft banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Graphic Turnaround Time:
2 Business Days
Warranty:
One (1) on hardware and graphics
This 13 ft. Falcon Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 13 ft. banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Graphic Turnaround Time: 2 Business Days
Warranty: One (1) on hardware and graphics
This 7ft Falcon Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 7ft banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Graphic Turnaround Time:
2 Business Days
Warranty:
One (1) on hardware and graphics
This 13 ft. Falcon Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 13 ft. banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Graphic Turnaround Time: 2 Business Days
Warranty: One (1) on hardware and graphics
This 7ft Falcon Flag is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided falcon graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle . All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Template Size: 20.5"w x 63.25"h
Graphic Turnaround Time: 2 Business Days
Warranty: One (1) year on hardware and graphics
This Double-Sided printed banner is a replacement graphic for the 13ft Falcon Banner Stand.
Package includes: Printed Banner (Double-Sided)
Graphic Turnaround Time: 2 Business Days
Warranty: one (1) on graphics
This 7ft Falcon Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 7ft banner stand on any concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on a polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Template Size: 20.5"w x 63.25"h
Graphic Turnaround Time: 2 Business Days
Warranty: One (1) year on hardware and graphics
This Single-Sided printed banner is a replacement graphic for the 13ft Falcon Banner Stand.
Package includes: Printed Banner (Single-Sided)
Graphic Turnaround Time: 2 Business Days
Warranty: one (1) on graphics
This is the hardware for the 13 ft. Falcon Banner Stand with Spike Base. The poles consist of materials such as aluminum, plastic, and carbon fiber. The spike base is equipped with a swivel head so your flag can sway sweetly in the wind.
Includes:
Warranty: One (1) year on hardware
This 13 ft. Falcon Flag is exactly the same as the Single-Sided Graphic Package, except this choice comes with a Double-Sided custom graphic. For the double-sided falcon graphic, we print two (2) separate flags, and we place silver-gray blocker material in the middle. All 3 pieces of fabric are sewn together to create a non-see-through double-sided banner flag.
Package includes:
Graphic Turnaround Time: 2 Business Days
Warranty: one (1) year on hardware and graphics
This 13 ft. Falcon Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 13 ft. banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Package includes:
Graphic Turnaround Time: 2 Business Days
Warranty: one (1) year on hardware and graphics
The new Pinpoint Flag, shaped as an upside-down teardrop, is made from aluminum, plastic and carbon fiber. Use indoors and outdoors. Size medium stands 86″h.
Includes:
Warranty: One year on hardware and graphics.
The new Pinpoint Flag, shaped as an upside-down teardrop, is made from aluminum, plastic and carbon fiber. Use indoors and outdoors. Size medium stands 86″h.
Includes:
Warranty: One year on hardware and graphics.
The new Pinpoint Flag, shaped as an upside-down teardrop, is made from aluminum, plastic and carbon fiber. Use indoors and outdoors. Size medium stands 86"h.
Includes:
Warranty: One year on hardware and graphics.
This is the replacement graphic for the Medium Pinpoint Flag for Outdoor use. Full color, edge-to-edge, dye-sublimated Fence Mesh graphic print, finished with black flag trim as pole pocket.
Includes:
Graphic size: 43″w x 86″h
Warranty: One year on graphic
If novelty attracts attention, then the Pinpoint Flag’s distinct style is sure to draw brand awareness! The Medium Pinpoint Flag is 43″ wide by 86″ tall. This graphic package comes with special outdoor fabric. The graphic is a full color, edge-to-edge, dye-sublimated Fence Mesh print, finished with black flag trim as pole pocket.
Graphic Package Includes:
Graphic size: 43″w x 86″h
Warranty: One year on graphic and hardware
If novelty attracts attention, then the Pinpoint Flag’s distinct style is sure to draw brand awareness! The Medium Pinpoint Flag is 43″ wide by 86″ tall. This graphic package comes with special outdoor fabric. The graphic is a full color, edge-to-edge, dye-sublimated Fence Mesh print, finished with black flag trim as pole pocket.
Graphic Package Includes:
Graphic size: 43″w x 86″h
Warranty: One year on graphic and hardware
If novelty attracts attention, then the Pinpoint Flag’s distinct style is sure to draw brand awareness! The Medium Pinpoint Flag is 43″ wide by 86″ tall. This graphic package comes with special outdoor fabric. The graphic is a full color, edge-to-edge, dye-sublimated Fence Mesh print, finished with black flag trim as pole pocket.
Graphic Package Includes:
Graphic size: 43″w x 86″h
Warranty: One year on graphic and hardware
Mount your Falcon flagpole to a wall or any other safe vertical surface with the Falcon Fixed Mount 0°. The bracket comes equipped with a welded-on ball bearing spindle, allowing your flag to rotate as desired. Heavy-duty expansion screws are tough enough for concrete surfaces.
Mount your Falcon flagpole on top of a short wall, on the floor or any other safe horizontal surface with the Falcon Fixed Mount 90°. The bracket comes equipped with a welded-on ball bearing spindle, allowing your flag to rotate as desired. Heavy-duty expansion screws are tough enough for concrete surfaces.
Differing from the standard spike base, the Falcon Triangle Spike Base is heavier with a sharper point. This spike base, shaped like a dagger, makes ground penetration easier—especially for tougher terrains.
Mount your Falcon flagpole to a wall or any other safe vertical surface with the Falcon Fixed Mount 30°. The bracket comes equipped with a welded-on ball bearing spindle, allowing your flag to rotate as desired. Heavy-duty expansion screws are tough enough for concrete surfaces.
This solid, square base is another base option to display your flag indoors. Selecting this option with give you the base to fit a size Medium, Large or Extra Large Feather Flag or Teardrop Flag.
Poll Insert:
4" tall
7/8" diameter
16 lbs
14"L x 14"W x .25"H
This solid, square base is another base option to display your flag indoors. Selecting this option with give you the base to fit a size Small Feather Flag or Teardrop Flag.
Poll Insert:
4" tall
11/16" diameter6 lbs
11.25"L x 11.25"W x .25"H
Selecting this product will give you the spike base that fits the Mamba flags in sizes: Small, Medium and Large. Use on any grassy area or other naturally-soft grounds. Watch this flag swivel in light winds as it displays your message.
Product Overview:
Once filled with water, the weight of this outdoor water base will provide more stability for your flag on a windy day. Selecting this product will give you a water base with an adapter used for MEDIUM, LARGE OR EXTRA LARGE Feather or Teardrop flags; it will also fit ALL SIZES or the Mamba flag.
Product Dimensions:
16"W x 6"H x 16"D
Water Weight:
Up to 25 lbs (About 2.5 gallons of water)
Selecting this product will give you the cross base that fits the Mamba flags in sizes: Small, Medium and Large.
Product Overview:
Once filled with water, the weight of this outdoor water base will provide more stability for your flag on a windy day. Selecting this product will give you a water base with an adapter used for SMALL Feather or Teardrop Flags only.
Product Dimensions:
16"W x 6"H x 16"D
Water Weight:
Up to 25 lbs (About 2.5 gallons of water)
This spike base will fit a size Small Feather or Teardrop flag only. Use on any grassy area or other naturally-soft grounds. Watch this flag swivel in light winds as it displays your message.
Selecting this product will give you the spike base that fits the Feather or Teardrop flags in sizes: Medium, Large and Extra Large. Use on any grassy area or other naturally-soft grounds. Watch this flag swivel in light winds as it displays your message.
This x-base will fit a size Medium, Large or Extra Large Feather or Teardrop flag only. Simply slip the flag pole onto this cross base, and place on any hard surface. Can be used indoors or outside. Watch this flag swivel in light winds as it displays your message.
Dimensions:
X-Base Medium/Large/X-Large
This x-base will fit a size Small Feather or Teardrop flag only. Simply slip the flag pole onto this cross base, and place on any hard surface. Can be used indoors or outside. Watch this flag swivel in light winds as it displays your message.
Dimension:
X-Base Small
Our Falcon X-Base is four-pronged and steel. Simply slip the bottom pole of the Falcon banner stand into this sturdy cross base to display this flag on any hard surfaces. Can be used indoors or outside.
Selecting this product will give you a water bag that can give your x-base some more extra support staying in place during light winds. It will work for Teardrop, Feather, Falcon or Mamba Flags.
Dimension:
Outer: 22" wide
Inner (hole): 4.25"
Height: 4" when filled
Water Weight:
Approximately 3 gallons (24 lbs)
The Falcon 7 ft. Bag will hold all its accessories at once! Fit it all and take on the go! There is room for the flag pole, the graphic, the spike base AND the x-base.
The Falcon 13 ft. Bag will hold all its accessories at once! Fit it all and take on the go! There is room for the flag pole, the graphic, the spike base AND the x-base.
Save budget on advertising, this swooper flag will help you sell more used cars.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Just for big auto dealers who buy out used cars.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Zero down payment swooper flag for advertising.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Need an used car , but have no credit? We can help.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Used car with low miles, I want one too.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Certified Used cars for sale.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Zero down payment advertised with this blue swooper flag.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Red color, eye catching, sell more trucks with this advertising swooper flag.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Auto dealer’s favorite advertising flag for their financial service.
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Attract customers with our white and black checkered swooper flags that people cannot miss!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Use this blue and white checkered swooper flag to increase traffic by getting your business noticed!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Let customers know about your free isnpections on tires batteries and brakes with this colorful swooper flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Increase sales and drive traffic to your car audio business with this vibrant swooper flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Attract customers and promote your tune up service with this high reslotuion swooper flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Let people know about your DMV Inspection services effectively using this vibrant flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Materia
Advertise your auto parts business with this colorful swooper flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Let people know where your inspection station is with this high resolution swooper flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
Let customers know that you finance with this vibrant swooper flag!
The Econo Feather Flag is suitable for indoor and outdoor events. Effectively advertise your logo or message with our econo feather flag. Available hardware is a ground stake to fit to your pole set.
Features: Polyester Flag Material
|
|
|
|
|
|
Call Now
