​

This is three (3) replacement graphics for the 4 ft. x 8 ft. Big Sky Triangle Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 3 graphic replacements, please order Satin Fabric per sq. ft. using the “Printing” tab.

Includes:
(3) SEG Fabric Graphics 4’w x 8’h
Graphic Size: 48.5”w x 98”h (including 1” bleed around perimeter)

How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic.

​

Big Sky Triangle Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Triangle Towers are equilateral triangular prisms at 8 ft. tall and come in varied width sizes.

Big Sky Tower accepts 3 individual custom fabric graphics for each side, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Backlit option is available.

Display Size: 4’L x 4’W x 8’H

4 ft. Hardware Package Includes:
(3) Vertical Extrusion pieces with connectors(6) Horizontal Extrusion pieces with connectors(1)
Torx Key

Warranty: Lifetime on Frame

Shipping Weight: 34 lbs
Shipping Dims: 97″L x 7″W x 10″H

​

This is three (3) replacement graphics for the 5 ft. x 8 ft. Big Sky Triangle Tower. Ordering this will give you fresh new graphics for the whole display. If you would like less than 3 graphic replacements, please order Satin Fabric per sq. ft. using the “Printing” tab.

Includes:
(3) SEG Fabric Graphics 5’w x 8’h
Graphic Size: 60.5”w x 98”h (including 1” bleed around perimeter)

How to install SEG graphic:
Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic.

​

Big Sky Triangle Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Triangle Towers are equilateral triangular prisms at 8 ft. tall and come in varied width sizes.

Big Sky Tower accepts 3 individual custom fabric graphics for each side, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Backlit option is available.

Display Size: 5’L x 5’W x 8’H

5 ft. Hardware Package Includes:
(3) Vertical Extrusion pieces with connectors(6) Horizontal Extrusion pieces with connectors(1) Torx Key

Warranty: Lifetime on Frame

Shipping Weight: 37 lbs
Shipping Dims: 97″L x 7″W x 10″H

​

Big Sky Tower accepts 3 individual custom fabric graphics for each side, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Backlit option is available.

Display Size: 5’L x 5’W x 8’H (Triangle)

5 ft. Graphic Package Includes:
(3) SEG Fabric Graphics 5’w x 8’h(3) Vertical Extrusion pieces with connectors(6) Horizontal Extrusion pieces with connectors(1) Torx Key

Warranty: 1 year on FrameOne (1) year on graphics

Graphic Size: 60.5″w x 98″h
Shipping Weight: 51 lbs
Shipping Dims: 97″L x 7″W x 10″H

​

Big Sky Triangle Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Triangle Towers are equilateral triangular prisms at 8 ft. tall and come in varied width sizes.

Big Sky Tower accepts 3 individual custom fabric graphics for each side, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Backlit option is available.

Display Size: 3’L x 3’W x 8’H

3 ft. Hardware Package Includes:
(3) Vertical Extrusion pieces with connectors(6) Horizontal Extrusion pieces with connectors(1) Torx Key
Warranty: Lifetime on Frame

Shipping Weight: 30 lbs
Shipping Dims: 97″L x 7″W x 10″H

​

Big Sky Tower accepts 3 individual custom fabric graphics for each side, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Backlit option is available.

Display Size: 2’L x 2’W x 8’H

2 ft. Hardware Package Includes:
(3) Vertical Extrusion pieces with connectors(6) Horizontal Extrusion pieces with connectors(1) Torx Key
Warranty: Lifetime on Frame

Shipping Weight: 26 lbs
Shipping Dims: 97″L x 7″W x 10″H

​

Description:
Big Sky Triangle Tower is part of the Resort Extrusion family—aluminum frames for Silicone-Edge Graphics (SEG). Custom-made on the premises, Big Sky Triangle Towers are equilateral triangular prisms at 8 ft. tall and come in varied width sizes.

Big Sky Tower accepts 3 individual custom fabric graphics for each side, excluding top and bottom. Insert graphics after frame is constructed by tilting it on its side. Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic. Backlit option is available.

2 ft. Graphic Package Includes:
(3) SEG Fabric Graphics 2’w x 8’h(3) Vertical Extrusion pieces with connectors(6) Horizontal Extrusion pieces with connectors(1) Torx Key

Warranty: 1 year on FrameOne (1) year on graphics

Graphic Size: 24.5″w x 98″h
Shipping Weight: 35 lbs
Shipping Dims: 97″L x 7″W x 10″H
Display Size: 2’L x 2’W x 8’H (Triangle)

​

Vail-120DB 8ft x 5ft Single-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 8ft x 6ft Frame Only. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Frame Includes:
Edge Lights(1) 4-Sided Frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 4’ x 4’ Frame Only. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is just as thick as the VAIL-120D. This display is easy to mount on the wall because it is lightweight, but can also hang overhead or stand independently. VAIL-120DB is especially good for edge-lights since its spine is shorter, holding the lights very close to the graphic’s edges. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is compatible with edge-lights or ladder lights (can be backlit).

Frame Includes:
(1) 4-Sided Frame(4) VAIL L-Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: Take two VAIL-120DB extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame
Frame Size: 48″W x 48″H x 4.72″D
Shipping Dimensions: (1) box 49.75″L x 7.25″W x 6.5″H

​

Vail-120DB 5ft x 8ft Single-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 8ft x 3ft Single-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 8ft x 4ft Single-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Double-Sided Graphic Replacement for the Vail-120DB 7’ x 2’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes: (2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 86″W x 26″H
Shipping Dimensions: 20″L x 12″W x 6″H
Shipping Weight: 6 lbs

​

Double-Sided Graphic Replacement for the Vail-120DB 8’ x 8’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 98″W x 98″H
Shipping Dimensions: 20″L x 16″W x 6″H
Shipping Weight: 8 lbs

​

Vail-120DB 2ft x 7ft Frame Only. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Frame Includes:
Edge Lights(1) 4-Sided Frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-op

​

Vail-120DB 3ft x 6ft Single-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 3ft x 8ft Double-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 4ft x 7ft Double-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 8ft x 8ft Frame Only. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Frame Includes:
Edge Lights(1) 4-Sided Frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 10ft x 8ft Double-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench

​

Vail-120DB 3ft x 4ft Double-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL L-Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 8ft x 4ft Frame Only. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Frame Includes:
Edge Lights(1) 4-Sided Frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Vail-120DB 5ft x 8ft Frame Only. The VAIL-120DB is a double-sided extrusion with a profile width of 120mm. This extrusion has a solid outside finish and is rigid due to its taller and reinforced spine. The thickest profile width we have to offer, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the thinner profile widths; however, it can be wall mounted or hung overhead as well as well. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit slightly more than 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Frame Includes:
Edge Lights(1) 4-Sided Frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

​

Single-Sided Graphic Replacement for the Vail-120DB 4’ x 8’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 50″W x 98″H
Shipping Dimensions: (1) box 16″L x 12″W x 6″H
Shipping Weight: 4 lbs

​

Vail-120DB 3ft x 6ft Double-Sided Graphic Package. Vail-120DB is a double-sided Resort Extrusion with a 120mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-120DB is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. This extrusion is also compatible with ladder lights (comes with edge lights standard).

Package Includes:
Edge Lights(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material:(mor(more…)

​

Vail-40D 8’ x 4’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses:
Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.

Material: Fabric
Print Process: Full Color Dye Sublimation

Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.

Upgrade to Replace: VAIL Toolless Corner Connector

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 96″W x 48″H x 1.57″D
Artwork Size: 98″W x 50″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Vail-40D 9’ x 8’ Frame Only. The VAIL-40D is a double-sided extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Frame Includes:
(1) 4-Sided Frame (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses:Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.

Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 8′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 108″W x 96″H x 1.57″D
Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H

​

Single-Sided Graphic Replacement for the Vail-40D 9’ x 8’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 110″W x 98″H

Shipping Dimensions: (1) box 20″L x 12″W x 6″H
Shipping Weight: 4 lbs

​

Single-Sided Graphic Replacement for the Vail-40D 7’ x 10’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 86″W x 122″H
Shipping Dimensions: (1) box 20″L x 12″W x 6″H
Shipping Weight: 4 lbs

​

Single-Sided Graphic Replacement for the Vail-40S 8’ x 9’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics
Artwork Size: 98″W x 110″H
Shipping Dimensions: (1) box 20″L x 12″W x 6″H
Shipping Weight: 4 lbs

​

Vail-40D 5’ x 5’ Frame Only. The VAIL-40D is a double-sided extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Frame Includes:
(1) 4-Sided Frame (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame
Frame Size: 60″W x 60″H x 1.57″D
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

​

Vail-40D 3’ x 7’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 36″W x 84″H x 1.57″D
Artwork Size: 38″W x 86″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Double-Sided Graphic Replacement for the Vail-40D 2’ x 3’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 26″W x 38″H
Shipping Dimensions: 12″L x 9″W x 6″H
Shipping Weight: 4 lbs

​

Vail-40D 6’ x 6’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 72″W x 72″H x 1.57″D
Artwork Size: 74″W x 74″H
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

​

Vail-40D 9’ x 6’ Frame Only. The VAIL-40D is a double-sided extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. Use fabric Silicone Edge Graphics (SEG) with this frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Frame Includes:
(1) 4-sided frame(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench ((2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 9’ edge and one 6′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame

Frame Size: 108″W x 72″H x 1.57″D
Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H

​

Double-Sided Graphic Replacement for the Vail-40D 9’ x 6’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 110″W x 74″H
Shipping Dimensions: 20″L x 16″W x 6″H
Shipping Weight: 8 lbs

​

Vail-40D 10’ x 8’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench(3) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key(2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Backdrop, Photo-ops, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation

Hardware Setup: To make one edge of the frame, take two cut VAIL-40D extrusions and, between, add Split Connector; tighten. Repeat this twice. Take one completed 10’ edge and one 8′ edge and slide in Corner Connector; tighten. Repeat this three times. Vertically insert ends of VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Split Connectors
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 120″W x 96″H x 1.57″D
Artwork Size: 122″W x 98″H
Shipping Dimensions: (2) boxes 96″L x 7.25″W x 6.5″H & 73.25″L x 7.25″W x 6.5″H

​

Vail-40D 5’ x 4’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 60″W x 48″H x 1.57″D
Artwork Size: 62″W x 50″H
Shipping Dimensions: (1) box 73.25″L x 7.25″W x 6.5″H

​

Double-Sided Graphic Replacement for the Vail-40D 5’ x 5’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(2) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation:Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 62″W x 62″H
Shipping Dimensions: 16″L x 10″W x 6″H
Shipping Weight: 6 lbs

​

Vail-40D 3’ x 8’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem) (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 36″W x 96″H x 1.57″D
Artwork Size: 38″W x 98″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Vail-40D 7’ x 4’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)
Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem)(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 84″W x 48″H x 1.57″D
Artwork Size: 86″W x 50″H
Shipping Dimensions: (1) box 96″L x 7.25″W x 6.5″H

​

Single-Sided Graphic Replacement for the Vail-40D 3’ x 7’. This edge-to-edge custom-made SEG fabric graphic has a sturdy edge hemmed with keter to help guide and snugly fit graphics into the frame. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.

Graphic Only Includes:
(1) Custom Single-Sided Graphic with SEG hem

Material: Fabric
Print Process: Full Color Dye Sublimation

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Warranty: One (1) year on graphics

Artwork Size: 38″W x 86″H
Shipping Dimensions: (1) box 16″L x 10″W x 6″H
Shipping Weight: 3 lbs

​

Vail-40D 2’ x 3’ Single-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(1) Custom Single-Sided Graphic (SEG hem) (4) VAIL L-Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Step & Repeat, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: : Take two VAIL-40D extrusions and slide in Corner Connector; tighten. Repeat this three times.
Upgrade to Replace: VAIL Toolless Corner Connector
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 24″W x 36″H x 1.57″D
Artwork Size: 26″W x 38″H
Shipping Dimensions: (1) box 49.75″L x 7.25″W x 6.5″H

​

Sleek and “EZ”, our tension fabric systems are a great alternative to standard backwall displays. Quickly assembled in just 5 minutes, slide the tubes together to make the frame and lock in place with a push button snap.  Then, simply pull the pillowcase-like graphic over the frame and zip it shut. The zipper, hidden from view, tightens the stretch fabric beautifully displaying your image.  Disassembled, this lightweight frame and graphic fits inside its included bag.

Graphic Package Includes:

• (1) 10 ft. Aluminum Frame
• 1) EZ Tube Travel Bag with wheels
• (1) Double-Sided Graphic Print

Features
Display Size: 120″W x 89″H x 22″D
Template Size: Front side: 122″W x 88.25″H; Back side: 123.5″W x 87.25″H
Shipping Size: 53”L x 13”W x 8”H
Material: Stretch Fabric, Dye-Sublimation
Weight: 32 lbs
Warranty: Lifetime on Hardware. One (1) year on Graphic.

​

Vail-40D 10’ x 9’ Double-Sided Graphic Package. The VAIL-40D is a double-sided Resort Extrusion with a profile width of 40mm. The alternative extrusion in style to the ASPEN-40D, the VAIL-40D has a solid outside finish. It is especially great for wall mounting and hanging overhead because it is lightweight, but can be used with feet to stand independently as it is more stable than the VAIL-40S. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough. Not compatible with lights (cannot be backlit.)

Package Includes:
(1) 4-Sided Frame(2) Custom Single-Sided Graphics (SEG hem)(4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench (5) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench (2) VAIL-40C Support Extrusions

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Backdrop, Photo-ops, Showrooms, Step & Repeat, Etc.

Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: To make one edge of the frame, take two matching-sized extrusions and, between, add Split Connector; tighten. Repeat this three times. Take one completed 10’ and 9’ edge and slide in Corner Connector; tighten. Repeat this three times. Connect VAIL-40C to the other; tighten. Vertically insert ends of completed VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Split Connectors
Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics

Frame Size: 120″W x 108″H x 1.57″D
Artwork Size: 122″W x 110″H
Shipping Dimensions: (2) boxes 73.25″L x 7.25″W x 6.5″H